Author: Rafael J. Wysocki <[email protected]> Date: Wed Jun 18 14:17:45 2025 +0200 ACPICA: Refuse to evaluate a method if arguments are missing [ Upstream commit 6fcab2791543924d438e7fa49276d0998b0a069f ] As reported in [1], a platform firmware update that increased the number of method parameters and forgot to update a least one of its callers, caused ACPICA to crash due to use-after-free. Since this a result of a clear AML issue that arguably cannot be fixed up by the interpreter (it cannot produce missing data out of thin air), address it by making ACPICA refuse to evaluate a method if the caller attempts to pass fewer arguments than expected to it. Closes: https://github.com/acpica/acpica/issues/1027 [1] Reported-by: Peter Williams <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Tested-by: Hans de Goede <[email protected]> # Dell XPS 9640 with BIOS 1.12.0 Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Tue Jun 10 08:43:19 2025 +0200 ALSA: sb: Don't allow changing the DMA mode during operations [ Upstream commit ed29e073ba93f2d52832804cabdd831d5d357d33 ] When a PCM stream is already running, one shouldn't change the DMA mode via kcontrol, which may screw up the hardware. Return -EBUSY instead. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218185 Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Tue Jun 10 08:43:20 2025 +0200 ALSA: sb: Force to disable DMAs once when DMA mode is changed [ Upstream commit 4c267ae2ef349639b4d9ebf00dd28586a82fdbe6 ] When the DMA mode is changed on the (still real!) SB AWE32 after playing a stream and closing, the previous DMA setup was still silently kept, and it can confuse the hardware, resulting in the unexpected noises. As a workaround, enforce the disablement of DMA setups when the DMA setup is changed by the kcontrol. https://bugzilla.kernel.org/show_bug.cgi?id=218185 Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Raju Rangoju <[email protected]> Date: Tue Jul 1 00:56:36 2025 +0530 amd-xgbe: align CL37 AN sequence as per databook [ Upstream commit 42fd432fe6d320323215ebdf4de4d0d7e56e6792 ] Update the Clause 37 Auto-Negotiation implementation to properly align with the PCS hardware specifications: - Fix incorrect bit settings in Link Status and Link Duplex fields - Implement missing sequence steps 2 and 7 These changes ensure CL37 auto-negotiation protocol follows the exact sequence patterns as specified in the hardware databook. Fixes: 1bf40ada6290 ("amd-xgbe: Add support for clause 37 auto-negotiation") Signed-off-by: Raju Rangoju <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Justin Sanders <[email protected]> Date: Tue Jun 10 17:06:00 2025 +0000 aoe: defer rexmit timer downdev work to workqueue [ Upstream commit cffc873d68ab09a0432b8212008c5613f8a70a2c ] When aoe's rexmit_timer() notices that an aoe target fails to respond to commands for more than aoe_deadsecs, it calls aoedev_downdev() which cleans the outstanding aoe and block queues. This can involve sleeping, such as in blk_mq_freeze_queue(), which should not occur in irq context. This patch defers that aoedev_downdev() call to the aoe device's workqueue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=212665 Signed-off-by: Justin Sanders <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-By: Valentin Kleibel <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Janne Grunau <[email protected]> Date: Wed Jun 11 22:30:31 2025 +0200 arm64: dts: apple: t8103: Fix PCIe BCM4377 nodename [ Upstream commit ac1daa91e9370e3b88ef7826a73d62a4d09e2717 ] Fix the following `make dtbs_check` warnings for all t8103 based devices: arch/arm64/boot/dts/apple/t8103-j274.dtb: network@0,0: $nodename:0: 'network@0,0' does not match '^wifi(@.*)?$' from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# arch/arm64/boot/dts/apple/t8103-j274.dtb: network@0,0: Unevaluated properties are not allowed ('local-mac-address' was unexpected) from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# Fixes: bf2c05b619ff ("arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address") Signed-off-by: Janne Grunau <[email protected]> Reviewed-by: Sven Peter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Raven Black <[email protected]> Date: Fri Jun 13 07:51:25 2025 -0400 ASoC: amd: yc: update quirk data for HP Victus [ Upstream commit 13b86ea92ebf0fa587fbadfb8a60ca2e9993203f ] Make the internal microphone work on HP Victus laptops. Signed-off-by: Raven Black <[email protected]> Link: https://patch.msgid.link/20250613-support-hp-victus-microphone-v1-1-bebc4c3a2041@gmail.com Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tasos Sahanidis <[email protected]> Date: Mon May 19 11:56:55 2025 +0300 ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled [ Upstream commit 33877220b8641b4cde474a4229ea92c0e3637883 ] On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices have not yet been enabled by the first time ata_acpi_cbl_80wire() is called. This means that the ata_for_each_dev loop is never entered, and a 40 wire cable is assumed. The VIA controller on this board does not report the cable in the PCI config space, thus having to fall back to ACPI even though no SATA bridge is present. The _GTM values are correctly reported by the firmware through ACPI, which has already set up faster transfer modes, but due to the above the controller is forced down to a maximum of UDMA/33. Resolve this by modifying ata_acpi_cbl_80wire() to directly return the cable type. First, an unknown cable is assumed which preserves the mode set by the firmware, and then on subsequent calls when the devices have been enabled, an 80 wire cable is correctly detected. Since the function now directly returns the cable type, it is renamed to ata_acpi_cbl_pata_type(). Signed-off-by: Tasos Sahanidis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Johannes Berg <[email protected]> Date: Fri Jun 6 11:01:11 2025 +0200 ata: pata_cs5536: fix build on 32-bit UML [ Upstream commit fe5b391fc56f77cf3c22a9dd4f0ce20db0e3533f ] On 32-bit ARCH=um, CONFIG_X86_32 is still defined, so it doesn't indicate building on real X86 machines. There's no MSR on UML though, so add a check for CONFIG_X86. Reported-by: Arnd Bergmann <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christian Eggers <[email protected]> Date: Wed Jun 25 15:09:29 2025 +0200 Bluetooth: hci_sync: revert some mesh modifications commit 46c0d947b64ac8efcf89dd754213dab5d1bd00aa upstream. This reverts minor parts of the changes made in commit b338d91703fa ("Bluetooth: Implement support for Mesh"). It looks like these changes were only made for development purposes but shouldn't have been part of the commit. Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: [email protected] Signed-off-by: Christian Eggers <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christian Eggers <[email protected]> Date: Wed Jun 25 15:09:31 2025 +0200 Bluetooth: MGMT: mesh_send: check instances prior disabling advertising commit f3cb5676e5c11c896ba647ee309a993e73531588 upstream. The unconditional call of hci_disable_advertising_sync() in mesh_send_done_sync() also disables other LE advertisings (non mesh related). I am not sure whether this call is required at all, but checking the adv_instances list (like done at other places) seems to solve the problem. Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: [email protected] Signed-off-by: Christian Eggers <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christian Eggers <[email protected]> Date: Wed Jun 25 15:09:30 2025 +0200 Bluetooth: MGMT: set_mesh: update LE scan interval and window commit e5af67a870f738bb8a4594b6c60c2caf4c87a3c9 upstream. According to the message of commit b338d91703fa ("Bluetooth: Implement support for Mesh"), MGMT_OP_SET_MESH_RECEIVER should set the passive scan parameters. Currently the scan interval and window parameters are silently ignored, although user space (bluetooth-meshd) expects that they can be used [1] [1] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/mesh/mesh-io-mgmt.c#n344 Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: [email protected] Signed-off-by: Christian Eggers <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yang Li <[email protected]> Date: Thu Jun 19 11:01:07 2025 +0800 Bluetooth: Prevent unintended pause by checking if advertising is active [ Upstream commit 1f029b4e30a602db33dedee5ac676e9236ad193c ] When PA Create Sync is enabled, advertising resumes unexpectedly. Therefore, it's necessary to check whether advertising is currently active before attempting to pause it. < HCI Command: LE Add Device To... (0x08|0x0011) plen 7 #1345 [hci0] 48.306205 Address type: Random (0x01) Address: 4F:84:84:5F:88:17 (Resolvable) Identity type: Random (0x01) Identity: FC:5B:8C:F7:5D:FB (Static) < HCI Command: LE Set Address Re.. (0x08|0x002d) plen 1 #1347 [hci0] 48.308023 Address resolution: Enabled (0x01) ... < HCI Command: LE Set Extended A.. (0x08|0x0039) plen 6 #1349 [hci0] 48.309650 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x01 Duration: 0 ms (0x00) Max ext adv events: 0 ... < HCI Command: LE Periodic Adve.. (0x08|0x0044) plen 14 #1355 [hci0] 48.314575 Options: 0x0000 Use advertising SID, Advertiser Address Type and address Reporting initially enabled SID: 0x02 Adv address type: Random (0x01) Adv address: 4F:84:84:5F:88:17 (Resolvable) Identity type: Random (0x01) Identity: FC:5B:8C:F7:5D:FB (Static) Skip: 0x0000 Sync timeout: 20000 msec (0x07d0) Sync CTE type: 0x0000 Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by: Yang Li <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Filipe Manana <[email protected]> Date: Mon Jun 23 12:11:58 2025 +0100 btrfs: fix iteration of extrefs during log replay [ Upstream commit 54a7081ed168b72a8a2d6ef4ba3a1259705a2926 ] At __inode_add_ref() when processing extrefs, if we jump into the next label we have an undefined value of victim_name.len, since we haven't initialized it before we did the goto. This results in an invalid memory access in the next iteration of the loop since victim_name.len was not initialized to the length of the name of the current extref. Fix this by initializing victim_name.len with the current extref's name length. Fixes: e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Filipe Manana <[email protected]> Date: Wed Jun 18 16:57:07 2025 +0100 btrfs: fix missing error handling when searching for inode refs during log replay [ Upstream commit 6561a40ceced9082f50c374a22d5966cf9fc5f5c ] During log replay, at __add_inode_ref(), when we are searching for inode ref keys we totally ignore if btrfs_search_slot() returns an error. This may make a log replay succeed when there was an actual error and leave some metadata inconsistency in a subvolume tree. Fix this by checking if an error was returned from btrfs_search_slot() and if so, return it to the caller. Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Filipe Manana <[email protected]> Date: Fri Jun 20 16:37:01 2025 +0100 btrfs: use btrfs_record_snapshot_destroy() during rmdir [ Upstream commit 157501b0469969fc1ba53add5049575aadd79d80 ] We are setting the parent directory's last_unlink_trans directly which may result in a concurrent task starting to log the directory not see the update and therefore can log the directory after we removed a child directory which had a snapshot within instead of falling back to a transaction commit. Replaying such a log tree would result in a mount failure since we can't currently delete snapshots (and subvolumes) during log replay. This is the type of failure described in commit 1ec9a1ae1e30 ("Btrfs: fix unreplayable log after snapshot delete + parent dir fsync"). Fix this by using btrfs_record_snapshot_destroy() which updates the last_unlink_trans field while holding the inode's log_mutex lock. Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink") Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christian König <[email protected]> Date: Tue Jan 28 10:47:48 2025 +0100 dma-buf: fix timeout handling in dma_resv_wait_timeout v2 commit 2b95a7db6e0f75587bffddbb490399cbb87e4985 upstream. Even the kerneldoc says that with a zero timeout the function should not wait for anything, but still return 1 to indicate that the fences are signaled now. Unfortunately that isn't what was implemented, instead of only returning 1 we also waited for at least one jiffies. Fix that by adjusting the handling to what the function is actually documented to do. v2: improve code readability Reported-by: Marek Olšák <[email protected]> Reported-by: Lucas Stach <[email protected]> Signed-off-by: Christian König <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Fushuai Wang <[email protected]> Date: Mon Jul 7 12:34:31 2025 -0400 dpaa2-eth: fix xdp_rxq_info leak [ Upstream commit 2def09ead4ad5907988b655d1e1454003aaf8297 ] The driver registered xdp_rxq_info structures via xdp_rxq_info_reg() but failed to properly unregister them in error paths and during removal. Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support") Signed-off-by: Fushuai Wang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Ioana Ciornei <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Szyprowski <[email protected]> Date: Wed Jun 18 14:06:26 2025 +0200 drm/exynos: fimd: Guard display clock control with runtime PM calls [ Upstream commit 5d91394f236167ac624b823820faf4aa928b889e ] Commit c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable") changed the call sequence to the CRTC enable/disable and bridge pre_enable/post_disable methods, so those bridge methods are now called when CRTC is not yet enabled. This causes a lockup observed on Samsung Peach-Pit/Pi Chromebooks. The source of this lockup is a call to fimd_dp_clock_enable() function, when FIMD device is not yet runtime resumed. It worked before the mentioned commit only because the CRTC implemented by the FIMD driver was always enabled what guaranteed the FIMD device to be runtime resumed. This patch adds runtime PM guards to the fimd_dp_clock_enable() function to enable its proper operation also when the CRTC implemented by FIMD is not yet enabled. Fixes: 196e059a8a6a ("drm/exynos: convert clock_enable crtc callback to pipeline clock") Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Junxiao Chang <[email protected]> Date: Fri Apr 25 23:11:07 2025 +0800 drm/i915/gsc: mei interrupt top half should be in irq disabled context [ Upstream commit 8cadce97bf264ed478669c6f32d5603b34608335 ] MEI GSC interrupt comes from i915. It has top half and bottom half. Top half is called from i915 interrupt handler. It should be in irq disabled context. With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC top half might be in threaded IRQ context. generic_handle_irq_safe API could be called from either IRQ or process context, it disables local IRQ then calls MEI GSC interrupt top half. This change fixes A380/A770 GPU boot hang issue with RT kernel. Fixes: 1e3dc1d8622b ("drm/i915/gsc: add gsc as a mei auxiliary device") Tested-by: Furong Zhou <[email protected]> Suggested-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Junxiao Chang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Rodrigo Vivi <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> (cherry picked from commit dccf655f69002d496a527ba441b4f008aa5bebbf) Signed-off-by: Joonas Lahtinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Janusz Krzysztofik <[email protected]> Date: Wed Jun 11 12:42:13 2025 +0200 drm/i915/gt: Fix timeline left held on VMA alloc error [ Upstream commit a5aa7bc1fca78c7fa127d9e33aa94a0c9066c1d6 ] The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. Fixes: 75d0a7f31eec ("drm/i915: Lift timeline into intel_context") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061 Cc: Chris Wilson <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Krzysztof Karas <[email protected]> Reviewed-by: Sebastian Brzezinka <[email protected]> Reviewed-by: Krzysztof Niemiec <[email protected]> Signed-off-by: Janusz Krzysztofik <[email protected]> Reviewed-by: Nitin Gote <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f) Signed-off-by: Joonas Lahtinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Wed Jun 25 10:21:58 2025 -0500 drm/i915/selftests: Change mock_request() to return error pointers [ Upstream commit caa7c7a76b78ce41d347003f84975125383e6b59 ] There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest(). The __mock_request_alloc() function implements the smoketest->request_alloc() function pointer. It was supposed to return error pointers, but it propogates the NULL return from mock_request() so in the event of a failure, it would lead to a NULL pointer dereference. To fix this, change the mock_request() function to return error pointers and update all the callers to expect that. Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rodrigo Vivi <[email protected]> (cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43) Signed-off-by: Joonas Lahtinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Clark <[email protected]> Date: Wed May 14 09:33:32 2025 -0700 drm/msm: Fix a fence leak in submit error path [ Upstream commit 5d319f75ccf7f0927425a7545aa1a22b3eedc189 ] In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Clark <[email protected]> Date: Wed May 14 09:33:33 2025 -0700 drm/msm: Fix another leak in the submit error path [ Upstream commit f681c2aa8676a890eacc84044717ab0fd26e058f ] put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Maíra Canal <[email protected]> Date: Sat Jun 28 19:42:42 2025 -0300 drm/v3d: Disable interrupts before resetting the GPU [ Upstream commit 226862f50a7a88e4e4de9abbf36c64d19acd6fd0 ] Currently, an interrupt can be triggered during a GPU reset, which can lead to GPU hangs and NULL pointer dereference in an interrupt context as shown in the following trace: [ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 314.043822] Mem abort info: [ 314.046606] ESR = 0x0000000096000005 [ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits [ 314.055651] SET = 0, FnV = 0 [ 314.058695] EA = 0, S1PTW = 0 [ 314.061826] FSC = 0x05: level 1 translation fault [ 314.066694] Data abort info: [ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000 [ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d] [ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d] [ 314.160198] sp : ffffffc080003ea0 [ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000 [ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0 [ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000 [ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000 [ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000 [ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001 [ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874 [ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180 [ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb [ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 314.234807] Call trace: [ 314.237243] v3d_irq+0xec/0x2e0 [v3d] [ 314.240906] __handle_irq_event_percpu+0x58/0x218 [ 314.245609] handle_irq_event+0x54/0xb8 [ 314.249439] handle_fasteoi_irq+0xac/0x240 [ 314.253527] handle_irq_desc+0x48/0x68 [ 314.257269] generic_handle_domain_irq+0x24/0x38 [ 314.261879] gic_handle_irq+0x48/0xd8 [ 314.265533] call_on_irq_stack+0x24/0x58 [ 314.269448] do_interrupt_handler+0x88/0x98 [ 314.273624] el1_interrupt+0x34/0x68 [ 314.277193] el1h_64_irq_handler+0x18/0x28 [ 314.281281] el1h_64_irq+0x64/0x68 [ 314.284673] default_idle_call+0x3c/0x168 [ 314.288675] do_idle+0x1fc/0x230 [ 314.291895] cpu_startup_entry+0x3c/0x50 [ 314.295810] rest_init+0xe4/0xf0 [ 314.299030] start_kernel+0x5e8/0x790 [ 314.302684] __primary_switched+0x80/0x90 [ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017) [ 314.312775] ---[ end trace 0000000000000000 ]--- [ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 314.324249] SMP: stopping secondary CPUs [ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000 [ 314.334076] PHYS_OFFSET: 0x0 [ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b [ 314.342337] Memory Limit: none [ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Before resetting the GPU, it's necessary to disable all interrupts and deal with any interrupt handler still in-flight. Otherwise, the GPU might reset with jobs still running, or yet, an interrupt could be handled during the reset. Cc: [email protected] Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Reviewed-by: Juan A. Suarez <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maíra Canal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alok Tiwari <[email protected]> Date: Sat Jun 28 07:56:05 2025 -0700 enic: fix incorrect MTU comparison in enic_change_mtu() [ Upstream commit aaf2b2480375099c022a82023e1cd772bf1c6a5d ] The comparison in enic_change_mtu() incorrectly used the current netdev->mtu instead of the new new_mtu value when warning about an MTU exceeding the port MTU. This could suppress valid warnings or issue incorrect ones. Fix the condition and log to properly reflect the new_mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Alok Tiwari <[email protected]> Acked-by: John Daley <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Fourier <[email protected]> Date: Wed Jun 25 16:16:24 2025 +0200 ethernet: atl1: Add missing DMA mapping error checks and count errors [ Upstream commit d72411d20905180cdc452c553be17481b24463d2 ] The `dma_map_XXX()` functions can fail and must be checked using `dma_mapping_error()`. This patch adds proper error handling for all DMA mapping calls. In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is deallocated and marked accordingly. In `atl1_tx_map()`, previously mapped buffers are unmapped and the packet is dropped on failure. If `atl1_xmit_frame()` drops the packet, increment the tx_error counter. Fixes: f3cc28c79760 ("Add Attansic L1 ethernet driver.") Signed-off-by: Thomas Fourier <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Michael J. Ruhl <[email protected]> Date: Fri Jun 27 10:35:11 2025 -0400 i2c/designware: Fix an initialization issue commit 3d30048958e0d43425f6d4e76565e6249fa71050 upstream. The i2c_dw_xfer_init() function requires msgs and msg_write_idx from the dev context to be initialized. amd_i2c_dw_xfer_quirk() inits msgs and msgs_num, but not msg_write_idx. This could allow an out of bounds access (of msgs). Initialize msg_write_idx before calling i2c_dw_xfer_init(). Reviewed-by: Andy Shevchenko <[email protected]> Fixes: 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU") Cc: <[email protected]> # v5.13+ Signed-off-by: Michael J. Ruhl <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Vitaly Lifshits <[email protected]> Date: Wed Jun 11 15:52:54 2025 +0300 igc: disable L1.2 PCI-E link substate to avoid performance issue [ Upstream commit 0325143b59c6c6d79987afc57d2456e7a20d13b7 ] I226 devices advertise support for the PCI-E link L1.2 substate. However, due to a hardware limitation, the exit latency from this low-power state is longer than the packet buffer can tolerate under high traffic conditions. This can lead to packet loss and degraded performance. To mitigate this, disable the L1.2 substate. The increased power draw between L1.1 and L1.2 is insignificant. Fixes: 43546211738e ("igc: Add new device ID's") Link: https://lore.kernel.org/intel-wired-lan/[email protected] Signed-off-by: Vitaly Lifshits <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Tested-by: Mor Bar-Gabay <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Borislav Petkov (AMD) <[email protected]> Date: Wed Sep 11 11:00:50 2024 +0200 KVM: SVM: Advertise TSA CPUID bits to guests Commit 31272abd5974b38ba312e9cf2ec2f09f9dd7dcba upstream. Synthesize the TSA CPUID feature bits for guests. Set TSA_{SQ,L1}_NO on unaffected machines. Signed-off-by: Borislav Petkov (AMD) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Mon Jun 30 14:36:40 2025 -0500 lib: test_objagg: Set error message in check_expect_hints_stats() [ Upstream commit e6ed134a4ef592fe1fd0cafac9683813b3c8f3e8 ] Smatch complains that the error message isn't set in the caller: lib/test_objagg.c:923 test_hints_case2() error: uninitialized symbol 'errmsg'. This static checker warning only showed up after a recent refactoring but the bug dates back to when the code was originally added. This likely doesn't affect anything in real life. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Thu Jul 10 15:59:54 2025 +0200 Linux 6.1.144 Link: https://lore.kernel.org/r/[email protected] Tested-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Florian Fainelli <[email protected]>-- Tested-by: Salvatore Bonaccorso <[email protected]> Tested-by: Mark Brown <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Miguel Ojeda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Thu Jun 5 14:28:45 2025 +0200 Logitech C-270 even more broken commit cee4392a57e14a799fbdee193bc4c0de65b29521 upstream. Some varieties of this device don't work with RESET_RESUME alone. Signed-off-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Avri Altman <[email protected]> Date: Mon May 26 14:44:45 2025 +0300 mmc: core: sd: Apply BROKEN_SD_DISCARD quirk earlier commit 009c3a4bc41e855fd76f92727f9fbae4e5917d7f upstream. Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the `mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is applied earlier in the device initialization process, aligning with the reasoning in [1]. Applying the quirk sooner prevents the kernel from incorrectly enabling discard support on affected cards during initial setup. [1] https://lore.kernel.org/all/[email protected] Fixes: 07d2872bf4c8 ("mmc: core: Add SD card quirk for broken discard") Signed-off-by: Avri Altman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Victor Shih <[email protected]> Date: Fri Jun 6 19:01:20 2025 +0800 mmc: sdhci: Add a helper function for dump register in dynamic debug mode commit 2881ba9af073faa8ee7408a8d1e0575e50eb3f6c upstream. Add a helper function for dump register in dynamic debug mode. Signed-off-by: Victor Shih <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pablo Martin-Gomez <[email protected]> Date: Wed Jun 18 13:35:16 2025 +0200 mtd: spinand: fix memory leak of ECC engine conf [ Upstream commit 6463cbe08b0cbf9bba8763306764f5fd643023e1 ] Memory allocated for the ECC engine conf is not released during spinand cleanup. Below kmemleak trace is seen for this memory leak: unreferenced object 0xffffff80064f00e0 (size 8): comm "swapper/0", pid 1, jiffies 4294937458 hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace (crc 0): kmemleak_alloc+0x30/0x40 __kmalloc_cache_noprof+0x208/0x3c0 spinand_ondie_ecc_init_ctx+0x114/0x200 nand_ecc_init_ctx+0x70/0xa8 nanddev_ecc_engine_init+0xec/0x27c spinand_probe+0xa2c/0x1620 spi_mem_probe+0x130/0x21c spi_probe+0xf0/0x170 really_probe+0x17c/0x6e8 __driver_probe_device+0x17c/0x21c driver_probe_device+0x58/0x180 __device_attach_driver+0x15c/0x1f8 bus_for_each_drv+0xec/0x150 __device_attach+0x188/0x24c device_initial_probe+0x10/0x20 bus_probe_device+0x11c/0x160 Fix the leak by calling nanddev_ecc_engine_cleanup() inside spinand_cleanup(). Signed-off-by: Pablo Martin-Gomez <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Masami Hiramatsu (Google) <[email protected]> Date: Thu Jun 5 10:07:38 2025 +0900 mtk-sd: Fix a pagefault in dma_unmap_sg() for not prepared data commit 539d80575b810c7a5987c7ac8915e3bc99c03695 upstream. When swiotlb buffer is full, the dma_map_sg() returns 0 to msdc_prepare_data(), but it does not check it and sets the MSDC_PREPARE_FLAG. swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */ <-swiotlb_map() <-dma_direct_map_page() <-dma_direct_map_sg() <-__dma_map_sg_attrs() <-dma_map_sg_attrs() <-dma_map_sg() /* returns 0 (pages mapped) */ <-msdc_prepare_data() Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls dma_unmap_sg() with unmapped pages. It causes a page fault. To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg() fails because this is not prepared. Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver") Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Tested-by: Sergey Senozhatsky <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Masami Hiramatsu (Google) <[email protected]> Date: Thu Jun 12 20:26:10 2025 +0900 mtk-sd: Prevent memory corruption from DMA map failure commit f5de469990f19569627ea0dd56536ff5a13beaa3 upstream. If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it. Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver") Cc: [email protected] Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sergey Senozhatsky <[email protected]> Date: Wed Jun 25 14:20:37 2025 +0900 mtk-sd: reset host->mrq on prepare_data() error commit ec54c0a20709ed6e56f40a8d59eee725c31a916b upstream. Do not leave host with dangling ->mrq pointer if we hit the msdc_prepare_data() error out path. Signed-off-by: Sergey Senozhatsky <[email protected]> Reviewed-by: Masami Hiramatsu (Google) <[email protected]> Fixes: f5de469990f1 ("mtk-sd: Prevent memory corruption from DMA map failure") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lion Ackermann <[email protected]> Date: Mon Jun 30 15:27:30 2025 +0200 net/sched: Always pass notifications when child class becomes empty [ Upstream commit 103406b38c600fec1fe375a77b27d87e314aea09 ] Certain classful qdiscs may invoke their classes' dequeue handler on an enqueue operation. This may unexpectedly empty the child qdisc and thus make an in-flight class passive via qlen_notify(). Most qdiscs do not expect such behaviour at this point in time and may re-activate the class eventually anyways which will lead to a use-after-free. The referenced fix commit attempted to fix this behavior for the HFSC case by moving the backlog accounting around, though this turned out to be incomplete since the parent's parent may run into the issue too. The following reproducer demonstrates this use-after-free: tc qdisc add dev lo root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo parent 1: classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1 tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0 tc qdisc add dev lo parent 2:1 handle 3: netem tc qdisc add dev lo parent 3:1 handle 4: blackhole echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 tc class delete dev lo classid 1:1 echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 Since backlog accounting issues leading to a use-after-frees on stale class pointers is a recurring pattern at this point, this patch takes a different approach. Instead of trying to fix the accounting, the patch ensures that qdisc_tree_reduce_backlog always calls qlen_notify when the child qdisc is empty. This solves the problem because deletion of qdiscs always involves a call to qdisc_reset() and / or qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing the following qdisc_tree_reduce_backlog() to report to the parent. Note that this may call qlen_notify on passive classes multiple times. This is not a problem after the recent patch series that made all the classful qdiscs qlen_notify() handlers idempotent. Fixes: 3f981138109f ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()") Signed-off-by: Lion Ackermann <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Acked-by: Cong Wang <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Oleksij Rempel <[email protected]> Date: Fri Jun 27 07:13:46 2025 +0200 net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnect [ Upstream commit 6c7ffc9af7186ed79403a3ffee9a1e5199fc7450 ] Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0 Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support") Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Oleksij Rempel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Thu Jun 12 14:52:50 2025 -0700 nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails. [ Upstream commit e8d6f3ab59468e230f3253efe5cb63efa35289f7 ] syzbot reported a warning below [1] following a fault injection in nfs_fs_proc_net_init(). [0] When nfs_fs_proc_net_init() fails, /proc/net/rpc/nfs is not removed. Later, rpc_proc_exit() tries to remove /proc/net/rpc, and the warning is logged as the directory is not empty. Let's handle the error of nfs_fs_proc_net_init() properly. [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) should_fail_ex (lib/fault-inject.c:73 lib/fault-inject.c:174) should_failslab (mm/failslab.c:46) kmem_cache_alloc_noprof (mm/slub.c:4178 mm/slub.c:4204) __proc_create (fs/proc/generic.c:427) proc_create_reg (fs/proc/generic.c:554) proc_create_net_data (fs/proc/proc_net.c:120) nfs_fs_proc_net_init (fs/nfs/client.c:1409) nfs_net_init (fs/nfs/inode.c:2600) ops_init (net/core/net_namespace.c:138) setup_net (net/core/net_namespace.c:443) copy_net_ns (net/core/net_namespace.c:576) create_new_namespaces (kernel/nsproxy.c:110) unshare_nsproxy_namespaces (kernel/nsproxy.c:218 (discriminator 4)) ksys_unshare (kernel/fork.c:3123) __x64_sys_unshare (kernel/fork.c:3190) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> [1]: remove_proc_entry: removing non-empty directory 'net/rpc', leaking at least 'nfs' WARNING: CPU: 1 PID: 6120 at fs/proc/generic.c:727 remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Modules linked in: CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727 Code: 3c 02 00 0f 85 85 00 00 00 48 8b 93 d8 00 00 00 4d 89 f0 4c 89 e9 48 c7 c6 40 ba a2 8b 48 c7 c7 60 b9 a2 8b e8 33 81 1d ff 90 <0f> 0b 90 90 e9 5f fe ff ff e8 04 69 5e ff 90 48 b8 00 00 00 00 00 RSP: 0018:ffffc90003637b08 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88805f534140 RCX: ffffffff817a92c8 RDX: ffff88807da99e00 RSI: ffffffff817a92d5 RDI: 0000000000000001 RBP: ffff888033431ac0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888033431a00 R13: ffff888033431ae4 R14: ffff888033184724 R15: dffffc0000000000 FS: 0000555580328500(0000) GS:ffff888124a62000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f71733743e0 CR3: 000000007f618000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sunrpc_exit_net+0x46/0x90 net/sunrpc/sunrpc_syms.c:76 ops_exit_list net/core/net_namespace.c:200 [inline] ops_undo_list+0x2eb/0xab0 net/core/net_namespace.c:253 setup_net+0x2e1/0x510 net/core/net_namespace.c:457 copy_net_ns+0x2a6/0x5f0 net/core/net_namespace.c:574 create_new_namespaces+0x3ea/0xa90 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:218 ksys_unshare+0x45b/0xa40 kernel/fork.c:3121 __do_sys_unshare kernel/fork.c:3192 [inline] __se_sys_unshare kernel/fork.c:3190 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3190 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x490 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa1a6b8e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff3a090368 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007fa1a6db5fa0 RCX: 00007fa1a6b8e929 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000080 RBP: 00007fa1a6c10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa1a6db5fa0 R14: 00007fa1a6db5fa0 R15: 0000000000000001 </TASK> Fixes: d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs in net namespaces") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=a4cc4ac22daa4a71b87c Tested-by: [email protected] Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Trond Myklebust <[email protected]> Date: Thu Jun 19 15:16:11 2025 -0400 NFSv4/flexfiles: Fix handling of NFS level errors in I/O [ Upstream commit 38074de35b015df5623f524d6f2b49a0cd395c40 ] Allow the flexfiles error handling to recognise NFS level errors (as opposed to RPC level errors) and handle them separately. The main motivator is the NFSERR_PERM errors that get returned if the NFS client connects to the data server through a port number that is lower than 1024. In that case, the client should disconnect and retry a READ on a different data server, or it should retry a WRITE after reconnecting. Reviewed-by: Tigran Mkrtchyan <[email protected]> Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Benjamin Coddington <[email protected]> Date: Thu Jun 19 11:02:21 2025 -0400 NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN [ Upstream commit c01776287414ca43412d1319d2877cbad65444ac ] We found a few different systems hung up in writeback waiting on the same page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count was zero. It seems most likely that this is another race between the waiter and waker similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task"). Fix it up by applying the advised barrier. Fixes: 880265c77ac4 ("pNFS: Avoid a live lock condition in pnfs_update_layout()") Signed-off-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Fourier <[email protected]> Date: Mon Jun 30 10:36:43 2025 +0200 nui: Fix dma_mapping_error() check [ Upstream commit 561aa0e22b70a5e7246b73d62a824b3aef3fc375 ] dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values which is often ~0. The error value should be tested with dma_mapping_error(). This patch creates a new function in niu_ops to test if the mapping failed. The test is fixed in niu_rbr_add_page(), added in niu_start_xmit() and the successfully mapped pages are unmaped upon error. Fixes: ec2deec1f352 ("niu: Fix to check for dma mapping errors.") Signed-off-by: Thomas Fourier <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Thompson <[email protected]> Date: Fri Jun 13 21:46:08 2025 +0000 platform/mellanox: mlxbf-tmfifo: fix vring_desc.len assignment [ Upstream commit 109f4d29dade8ae5b4ac6325af9d1bc24b4230f8 ] Fix warnings reported by sparse, related to incorrect type: drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types) drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors") Signed-off-by: David Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alok Tiwari <[email protected]> Date: Mon Jun 30 03:58:08 2025 -0700 platform/mellanox: mlxreg-lc: Fix logic error in power state check [ Upstream commit 644bec18e705ca41d444053407419a21832fcb2f ] Fixes a logic issue in mlxreg_lc_completion_notify() where the intention was to check if MLXREG_LC_POWERED flag is not set before powering on the device. The original code used "state & ~MLXREG_LC_POWERED" to check for the absence of the POWERED bit. However this condition evaluates to true even when other bits are set, leading to potentially incorrect behavior. Corrected the logic to explicitly check for the absence of MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED). Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Suggested-by: Vadim Pasternak <[email protected]> Signed-off-by: Alok Tiwari <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alok Tiwari <[email protected]> Date: Sun Jun 22 00:29:12 2025 -0700 platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message [ Upstream commit d07143b507c51c04c091081627c5a130e9d3c517 ] change error log to use correct bus number from main_mux_devs instead of cpld_devs. Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Alok Tiwari <[email protected]> Reviewed-by: Vadim Pasternak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kurt Borja <[email protected]> Date: Wed Jun 25 22:17:37 2025 -0300 platform/x86: dell-wmi-sysman: Fix class device unregistration [ Upstream commit 314e5ad4782d08858b3abc325c0487bd2abc23a1 ] Devices under the firmware_attributes_class do not have unique a dev_t. Therefore, device_unregister() should be used instead of device_destroy(), since the latter may match any device with a given dev_t. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kurt Borja <[email protected]> Date: Mon Jun 30 00:43:12 2025 -0300 platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks [ Upstream commit eb617dd25ca176f3fee24f873f0fd60010773d67 ] After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content. Reported-by: Jan Graczyk <[email protected]> Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/ Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Suggested-by: Linus Torvalds <[email protected]> Reviewed-by: Armin Wolf <[email protected]> Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kurt Borja <[email protected]> Date: Mon Jun 30 14:31:19 2025 -0300 platform/x86: think-lmi: Create ksets consecutively commit 8dab34ca77293b409c3223636dde915a22656748 upstream. Avoid entering tlmi_release_attr() in error paths if both ksets are not yet created. This is accomplished by initializing them side by side. Reviewed-by: Mark Pearson <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Cc: [email protected] Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kurt Borja <[email protected]> Date: Wed Jun 25 22:17:36 2025 -0300 platform/x86: think-lmi: Fix class device unregistration [ Upstream commit 5ff1fbb3059730700b4823f43999fc1315984632 ] Devices under the firmware_attributes_class do not have unique a dev_t. Therefore, device_unregister() should be used instead of device_destroy(), since the latter may match any device with a given dev_t. Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kurt Borja <[email protected]> Date: Mon Jun 30 14:31:20 2025 -0300 platform/x86: think-lmi: Fix kobject cleanup commit 9110056fe10b0519529bdbbac37311a5037ea0c2 upstream. In tlmi_analyze(), allocated structs with an embedded kobject are freed in error paths after the they were already initialized. Fix this by first by avoiding the initialization of kobjects in tlmi_analyze() and then by correctly cleaning them up in tlmi_release_attr() using their kset's kobject list. Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Fixes: 30e78435d3bf ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls") Cc: [email protected] Reviewed-by: Mark Pearson <[email protected]> Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Kurt Borja <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Madhavan Srinivasan <[email protected]> Date: Sat May 17 19:52:37 2025 +0530 powerpc: Fix struct termio related ioctl macros [ Upstream commit ab107276607af90b13a5994997e19b7b9731e251 ] Since termio interface is now obsolete, include/uapi/asm/ioctls.h has some constant macros referring to "struct termio", this caused build failure at userspace. In file included from /usr/include/asm/ioctl.h:12, from /usr/include/asm/ioctls.h:5, from tst-ioctls.c:3: tst-ioctls.c: In function 'get_TCGETA': tst-ioctls.c:12:10: error: invalid application of 'sizeof' to incomplete type 'struct termio' 12 | return TCGETA; | ^~~~~~ Even though termios.h provides "struct termio", trying to juggle definitions around to make it compile could introduce regressions. So better to open code it. Reported-by: Tulio Magno <[email protected]> Suggested-by: Nicholas Piggin <[email protected]> Tested-by: Justin M. Forbes <[email protected]> Reviewed-by: Michael Ellerman <[email protected]> Closes: https://lore.kernel.org/linuxppc-dev/[email protected]/ Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Uladzislau Rezki (Sony) <[email protected]> Date: Tue Jun 10 19:34:48 2025 +0200 rcu: Return early if callback is not specified [ Upstream commit 33b6a1f155d627f5bd80c7485c598ce45428f74f ] Currently the call_rcu() API does not check whether a callback pointer is NULL. If NULL is passed, rcu_core() will try to invoke it, resulting in NULL pointer dereference and a kernel crash. To prevent this and improve debuggability, this patch adds a check for NULL and emits a kernel stack trace to help identify a faulty caller. Signed-off-by: Uladzislau Rezki (Sony) <[email protected]> Reviewed-by: Joel Fernandes <[email protected]> Signed-off-by: Joel Fernandes <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Patrisious Haddad <[email protected]> Date: Mon Jun 16 12:14:53 2025 +0300 RDMA/mlx5: Fix CC counters query for MPV [ Upstream commit acd245b1e33fc4b9d0f2e3372021d632f7ee0652 ] In case, CC counters are querying for the second port use the correct core device for the query instead of always using the master core device. Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE") Signed-off-by: Patrisious Haddad <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Link: https://patch.msgid.link/9cace74dcf106116118bebfa9146d40d4166c6b0.1750064969.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mark Zhang <[email protected]> Date: Tue Jun 17 11:13:55 2025 +0300 RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert [ Upstream commit 8edab8a72d67742f87e9dc2e2b0cdfddda5dc29a ] The obj_event may be loaded immediately after inserted, then if the list_head is not initialized then we may get a poisonous pointer. This fixes the crash below: mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced) mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056 mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0 mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000 [0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E) [last unloaded: mst_pci] CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1 Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023 pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--) pc : dispatch_event_fd+0x68/0x300 [mlx5_ib] lr : devx_event_notifier+0xcc/0x228 [mlx5_ib] sp : ffff80001005bcf0 x29: ffff80001005bcf0 x28: 0000000000000001 x27: ffff244e0740a1d8 x26: ffff244e0740a1d0 x25: ffffda56beff5ae0 x24: ffffda56bf911618 x23: ffff244e0596a480 x22: ffff244e0596a480 x21: ffff244d8312ad90 x20: ffff244e0596a480 x19: fffffffffffffff0 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda56be66d620 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000040 x10: ffffda56bfcafb50 x9 : ffffda5655c25f2c x8 : 0000000000000010 x7 : 0000000000000000 x6 : ffff24545a2e24b8 x5 : 0000000000000003 x4 : ffff80001005bd28 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff244e0596a480 x0 : ffff244d8312ad90 Call trace: dispatch_event_fd+0x68/0x300 [mlx5_ib] devx_event_notifier+0xcc/0x228 [mlx5_ib] atomic_notifier_call_chain+0x58/0x80 mlx5_eq_async_int+0x148/0x2b0 [mlx5_core] atomic_notifier_call_chain+0x58/0x80 irq_int_handler+0x20/0x30 [mlx5_core] __handle_irq_event_percpu+0x60/0x220 handle_irq_event_percpu+0x3c/0x90 handle_irq_event+0x58/0x158 handle_fasteoi_irq+0xfc/0x188 generic_handle_irq+0x34/0x48 ... Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Link: https://patch.msgid.link/r/3ce7f20e0d1a03dc7de6e57494ec4b8eaf1f05c2.1750147949.git.leon@kernel.org Signed-off-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Manivannan Sadhasivam <[email protected]> Date: Thu Jul 3 16:05:49 2025 +0530 regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods commit c9764fd88bc744592b0604ccb6b6fc1a5f76b4e3 upstream. drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But the memory is allocated for only one pointer. This will lead to out-of-bounds access later in the code if 'config::ngpios' is > 1. So fix the code to allocate enough memory to hold 'config::ngpios' of GPIO descriptors. While at it, also move the check for memory allocation failure to be below the allocation to make it more readable. Cc: [email protected] # 5.0 Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ulf Hansson <[email protected]> Date: Tue Jun 24 13:09:32 2025 +0200 Revert "mmc: sdhci: Disable SD card clock before changing parameters" commit dcc3bcfc5b50c625b475dcc25d167b6b947a6637 upstream. It has turned out the trying to strictly conform to the SDHCI specification is causing problems. Let's revert and start over. This reverts commit fb3bbc46c94f261b6156ee863c1b06c84cf157dc. Cc: Erick Shepherd <[email protected]> Cc: [email protected] Fixes: fb3bbc46c94f ("mmc: sdhci: Disable SD card clock before changing parameters") Suggested-by: Adrian Hunter <[email protected]> Reported-by: Jonathan Liu <[email protected]> Reported-by: Salvatore Bonaccorso <[email protected]> Closes: https://bugs.debian.org/1108065 Acked-by: Adrian Hunter <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kohei Enju <[email protected]> Date: Sun Jun 29 12:06:31 2025 +0900 rose: fix dangling neighbour pointers in rose_rt_device_down() [ Upstream commit 34a500caf48c47d5171f4aa1f237da39b07c6157 ] There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations. Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb Tested-by: [email protected] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kohei Enju <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mateusz Jończyk <[email protected]> Date: Sat Jun 7 23:06:08 2025 +0200 rtc: cmos: use spin_lock_irqsave in cmos_interrupt commit 00a39d8652ff9088de07a6fe6e9e1893452fe0dd upstream. cmos_interrupt() can be called in a non-interrupt context, such as in an ACPI event handler (which runs in an interrupt thread). Therefore, usage of spin_lock(&rtc_lock) is insecure. Use spin_lock_irqsave() / spin_unlock_irqrestore() instead. Before a misguided commit 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") the cmos_interrupt() function used spin_lock_irqsave(). That commit changed it to spin_lock() and broke locking, which was partially fixed in commit 13be2efc390a ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()") That second commit did not take account of the ACPI fixed event handler pathway, however. It introduced local_irq_disable() workarounds in cmos_check_wkalrm(), which can cause problems on PREEMPT_RT kernels and are now unnecessary. Add an explicit comment so that this change will not be reverted by mistake. Cc: [email protected] Fixes: 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") Signed-off-by: Mateusz Jończyk <[email protected]> Reviewed-by: Sebastian Andrzej Siewior <[email protected]> Tested-by: Chris Bainbridge <[email protected]> Reported-by: Chris Bainbridge <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Niklas Schnelle <[email protected]> Date: Wed Jun 25 11:28:29 2025 +0200 s390/pci: Do not try re-enabling load/store if device is disabled commit b97a7972b1f4f81417840b9a2ab0c19722b577d5 upstream. If a device is disabled unblocking load/store on its own is not useful as a full re-enable of the function is necessary anyway. Note that SCLP Write Event Data Action Qualifier 0 (Reset) leaves the device disabled and triggers this case unless the driver already requests a reset. Cc: [email protected] Fixes: 4cdf2f4e24ff ("s390/pci: implement minimal PCI error recovery") Reviewed-by: Farhan Ali <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Fourier <[email protected]> Date: Tue Jun 17 18:11:11 2025 +0200 scsi: qla2xxx: Fix DMA mapping test in qla24xx_get_port_database() [ Upstream commit c3b214719a87735d4f67333a8ef3c0e31a34837c ] dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is often ~0. The error value should be tested with dma_mapping_error() like it was done in qla26xx_dport_diagnostics(). Fixes: 818c7f87a177 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP") Signed-off-by: Thomas Fourier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Fourier <[email protected]> Date: Wed Jun 18 09:17:37 2025 +0200 scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu() [ Upstream commit 00f452a1b084efbe8dcb60a29860527944a002a1 ] dma_map_XXX() can fail and should be tested for errors with dma_mapping_error(). Fixes: b3a271a94d00 ("[SCSI] qla4xxx: support iscsiadm session mgmt") Signed-off-by: Thomas Fourier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Maurizio Lombardi <[email protected]> Date: Thu Jun 12 12:15:56 2025 +0200 scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port() [ Upstream commit d8ab68bdb294b09a761e967dad374f2965e1913f ] The function core_scsi3_decode_spec_i_port(), in its error code path, unconditionally calls core_scsi3_lunacl_undepend_item() passing the dest_se_deve pointer, which may be NULL. This can lead to a NULL pointer dereference if dest_se_deve remains unset. SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg Unable to handle kernel paging request at virtual address dfff800000000012 Call trace: core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P) core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod] core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod] target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod] Fix this by adding a NULL check before calling core_scsi3_lunacl_undepend_item() Signed-off-by: Maurizio Lombardi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Reviewed-by: John Meneghini <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bart Van Assche <[email protected]> Date: Tue Jun 24 11:16:44 2025 -0700 scsi: ufs: core: Fix spelling of a sysfs attribute name [ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Avri Altman <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Wang Zhaolong <[email protected]> Date: Thu Jul 3 21:29:52 2025 +0800 smb: client: fix race condition in negotiate timeout by using more precise timing [ Upstream commit 266b5d02e14f3a0e07414e11f239397de0577a1d ] When the SMB server reboots and the client immediately accesses the mount point, a race condition can occur that causes operations to fail with "Host is down" error. Reproduction steps: # Mount SMB share mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx ls /mnt # Reboot server ssh [email protected] reboot ssh [email protected] /path/to/cifs_server_setup.sh ssh [email protected] systemctl stop firewalld # Immediate access fails ls /mnt ls: cannot access '/mnt': Host is down # But works if there is a delay The issue is caused by a race condition between negotiate and reconnect. The 20-second negotiate timeout mechanism can interfere with the normal recovery process when both are triggered simultaneously. ls cifsd --------------------------------------------------- cifs_getattr cifs_revalidate_dentry cifs_get_inode_info cifs_get_fattr smb2_query_path_info smb2_compound_op SMB2_open_init smb2_reconnect cifs_negotiate_protocol smb2_negotiate cifs_send_recv smb_send_rqst wait_for_response cifs_demultiplex_thread cifs_read_from_socket cifs_readv_from_socket server_unresponsive cifs_reconnect __cifs_reconnect cifs_abort_connection mid->mid_state = MID_RETRY_NEEDED cifs_wake_up_task cifs_sync_mid_result // case MID_RETRY_NEEDED rc = -EAGAIN; // In smb2_negotiate() rc = -EHOSTDOWN; The server_unresponsive() timeout triggers cifs_reconnect(), which aborts ongoing mid requests and causes the ls command to receive -EAGAIN, leading to -EHOSTDOWN. Fix this by introducing a dedicated `neg_start` field to precisely tracks when the negotiate process begins. The timeout check now uses this accurate timestamp instead of `lstrp`, ensuring that: 1. Timeout is only triggered after negotiate has actually run for 20s 2. The mechanism doesn't interfere with concurrent recovery processes 3. Uninitialized timestamps (value 0) don't trigger false timeouts Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto") Signed-off-by: Wang Zhaolong <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: James Clark <[email protected]> Date: Fri Jun 27 11:21:37 2025 +0100 spi: spi-fsl-dspi: Clear completion counter before initiating transfer [ Upstream commit fa60c094c19b97e103d653f528f8d9c178b6a5f5 ] In target mode, extra interrupts can be received between the end of a transfer and halting the module if the host continues sending more data. If the interrupt from this occurs after the reinit_completion() then the completion counter is left at a non-zero value. The next unrelated transfer initiated by userspace will then complete immediately without waiting for the interrupt or writing to the RX buffer. Fix it by resetting the counter before the transfer so that lingering values are cleared. This is done after clearing the FIFOs and the status register but before the transfer is initiated, so no interrupts should be received at this point resulting in other race conditions. Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion") Signed-off-by: James Clark <[email protected]> Reviewed-by: Frank Li <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peter Chen <[email protected]> Date: Thu Jun 19 09:34:13 2025 +0800 usb: cdnsp: do not disable slot for disabled slot commit 7e2c421ef88e9da9c39e01496b7f5b0b354b42bc upstream. It doesn't need to do it, and the related command event returns 'Slot Not Enabled Error' status. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <[email protected]> Suggested-by: Hongliang Yang <[email protected]> Reviewed-by: Fugang Duan <[email protected]> Signed-off-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: RD Babiera <[email protected]> Date: Wed Jun 18 22:49:42 2025 +0000 usb: typec: altmodes/displayport: do not index invalid pin_assignments commit af4db5a35a4ef7a68046883bfd12468007db38f1 upstream. A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable <[email protected]> Signed-off-by: RD Babiera <[email protected]> Reviewed-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Andrei Kuchynski <[email protected]> Date: Tue Jun 24 13:32:46 2025 +0000 usb: typec: displayport: Fix potential deadlock commit 099cf1fbb8afc3771f408109f62bdec66f85160e upstream. The deadlock can occur due to a recursive lock acquisition of `cros_typec_altmode_data::mutex`. The call chain is as follows: 1. cros_typec_altmode_work() acquires the mutex 2. typec_altmode_vdm() -> dp_altmode_vdm() -> 3. typec_altmode_exit() -> cros_typec_altmode_exit() 4. cros_typec_altmode_exit() attempts to acquire the mutex again To prevent this, defer the `typec_altmode_exit()` call by scheduling it rather than calling it directly from within the mutex-protected context. Cc: stable <[email protected]> Fixes: b4b38ffb38c9 ("usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode") Signed-off-by: Andrei Kuchynski <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Bui Quang Minh <[email protected]> Date: Mon Jul 7 04:14:54 2025 -0400 virtio-net: ensure the received length does not exceed allocated size [ Upstream commit 315dbdd7cdf6aa533829774caaf4d25f1fd20e73 ] In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check. Cc: <[email protected]> Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Bui Quang Minh <[email protected]> Acked-by: Jason Wang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: HarshaVardhana S A <[email protected]> Date: Tue Jul 1 14:22:54 2025 +0200 vsock/vmci: Clear the vmci transport packet properly when initializing it commit 223e2288f4b8c262a864e2c03964ffac91744cd5 upstream. In vmci_transport_packet_init memset the vmci_transport_packet before populating the fields to avoid any uninitialised data being left in the structure. Cc: Bryan Tan <[email protected]> Cc: Vishnu Dasa <[email protected]> Cc: Broadcom internal kernel review list Cc: Stefano Garzarella <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Simon Horman <[email protected]> Cc: [email protected] Cc: [email protected] Cc: stable <[email protected]> Signed-off-by: HarshaVardhana S A <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Acked-by: Stefano Garzarella <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Johannes Berg <[email protected]> Date: Tue Jun 17 11:45:29 2025 +0200 wifi: ath6kl: remove WARN on bad firmware input [ Upstream commit e7417421d89358da071fd2930f91e67c7128fbff ] If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too. Reported-by: [email protected] Tested-by: [email protected] Acked-by: Jeff Johnson <[email protected]> Link: https://patch.msgid.link/20250617114529.031a677a348e.I58bf1eb4ac16a82c546725ff010f3f0d2b0cca49@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Johannes Berg <[email protected]> Date: Mon Jun 16 17:18:38 2025 +0200 wifi: mac80211: drop invalid source address OCB frames [ Upstream commit d1b1a5eb27c4948e8811cf4dbb05aaf3eb10700c ] In OCB, don't accept frames from invalid source addresses (and in particular don't try to create stations for them), drop the frames instead. Reported-by: [email protected] Closes: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Johannes Berg <[email protected]> Tested-by: [email protected] Link: https://patch.msgid.link/20250616171838.7433379cab5d.I47444d63c72a0bd58d2e2b67bb99e1fea37eec6f@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Borislav Petkov (AMD) <[email protected]> Date: Wed Sep 11 10:53:08 2024 +0200 x86/bugs: Add a Transient Scheduler Attacks mitigation commit d8010d4ba43e9f790925375a7de100604a5e2dba upstream. Add the required features detection glue to bugs.c et all in order to support the TSA mitigation. Co-developed-by: Kim Phillips <[email protected]> Signed-off-by: Kim Phillips <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Pawan Gupta <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Borislav Petkov (AMD) <[email protected]> Date: Wed Sep 11 05:13:46 2024 +0200 x86/bugs: Rename MDS machinery to something more generic Commit f9af88a3d384c8b55beb5dc5483e5da0135fadbd upstream. It will be used by other x86 mitigations. No functional changes. Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Pawan Gupta <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Borislav Petkov (AMD) <[email protected]> Date: Mon Apr 14 15:33:19 2025 +0200 x86/process: Move the buffer clearing before MONITOR Commit 8e786a85c0a3c0fffae6244733fb576eeabd9dec upstream. Move the VERW clearing before the MONITOR so that VERW doesn't disarm it and the machine never enters C1. Original idea by Kim Phillips <[email protected]>. Suggested-by: Andrew Cooper <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mathias Nyman <[email protected]> Date: Fri Jun 27 17:41:22 2025 +0300 xhci: dbc: Flush queued requests before stopping dbc commit efe3e3ae5a66cb38ef29c909e951b4039044bae9 upstream. Flush dbc requests when dbc is stopped and transfer rings are freed. Failure to flush them lead to leaking memory and dbc completing odd requests after resuming from suspend, leading to error messages such as: [ 95.344392] xhci_hcd 0000:00:0d.0: no matched request Cc: stable <[email protected]> Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Łukasz Bartosik <[email protected]> Date: Fri Jun 27 17:41:21 2025 +0300 xhci: dbctty: disable ECHO flag by default commit 2b857d69a5e116150639a0c6c39c86cc329939ee upstream. When /dev/ttyDBC0 device is created then by default ECHO flag is set for the terminal device. However if data arrives from a peer before application using /dev/ttyDBC0 applies its set of terminal flags then the arriving data will be echoed which might not be desired behavior. Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.") Cc: stable <[email protected]> Signed-off-by: Łukasz Bartosik <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/stable/20250610111802.18742-1-ukaszb%40chromium.org Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hongyu Xie <[email protected]> Date: Fri Jun 27 17:41:20 2025 +0300 xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS commit cd65ee81240e8bc3c3119b46db7f60c80864b90b upstream. Disable stream for platform xHC controller with broken stream. Fixes: 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable") Cc: stable <[email protected]> Signed-off-by: Hongyu Xie <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>