Author: Kuniyuki Iwashima <[email protected]> Date: Fri Aug 16 16:39:21 2024 -0700 af_unix: Don't call skb_get() for OOB skb. [ Upstream commit 8594d9b85c07f05e431bd07e895c2a3ad9b85d6f ] Since introduced, OOB skb holds an additional reference count with no special reason and caused many issues. Also, kfree_skb() and consume_skb() are used to decrement the count, which is confusing. Let's drop the unnecessary skb_get() in queue_oob() and corresponding kfree_skb(), consume_skb(), and skb_unref(). Now unix_sk(sk)->oob_skb is just a pointer to skb in the receive queue, so special handing is no longer needed in GC. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: 32ca245464e1 ("af_unix: Don't leave consecutive consumed OOB skbs.") Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Wed Jun 18 21:13:55 2025 -0700 af_unix: Don't leave consecutive consumed OOB skbs. [ Upstream commit 32ca245464e1479bfea8592b9db227fdc1641705 ] Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249) __alloc_skb (net/core/skbuff.c:660 (discriminator 4)) alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668) sock_alloc_send_pskb (net/core/sock.c:2993) unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418) __sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20)) __x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1)) __kasan_slab_free (mm/kasan/common.c:271) kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3)) unix_stream_read_generic (net/unix/af_unix.c:3010) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) The buggy address belongs to the object at ffff888106ef28c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 68 bytes inside of freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x200000000000040(head|node=0|zone=2) page_type: f5(slab) raw: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004 raw: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000 head: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004 head: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000 head: 0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 314001f0bf92 ("af_unix: Add OOB support") Reported-by: Jann Horn <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Jann Horn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Wed Jun 18 21:13:57 2025 -0700 af_unix: Don't set -ECONNRESET for consumed OOB skb. [ Upstream commit 2a5a4841846b079b5fca5752fe94e59346fbda40 ] Christian Brauner reported that even after MSG_OOB data is consumed, calling close() on the receiver socket causes the peer's recv() to return -ECONNRESET: 1. send() and recv() an OOB data. >>> from socket import * >>> s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) >>> s1.send(b'x', MSG_OOB) 1 >>> s2.recv(1, MSG_OOB) b'x' 2. close() for s2 sets ECONNRESET to s1->sk_err even though s2 consumed the OOB data >>> s2.close() >>> s1.recv(10, MSG_DONTWAIT) ... ConnectionResetError: [Errno 104] Connection reset by peer Even after being consumed, the skb holding the OOB 1-byte data stays in the recv queue to mark the OOB boundary and break recv() at that point. This must be considered while close()ing a socket. Let's skip the leading consumed OOB skb while checking the -ECONNRESET condition in unix_release_sock(). Fixes: 314001f0bf92 ("af_unix: Add OOB support") Reported-by: Christian Brauner <[email protected]> Closes: https://lore.kernel.org/netdev/20250529-sinkt-abfeuern-e7b08200c6b0@brauner/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Christian Brauner <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Salvatore Bonaccorso <[email protected]> Date: Wed Jun 25 20:41:28 2025 +0200 ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X507UAR [ Upstream commit 7ab6847a03229e73bb7c58ca397630f699e79b53 ] The built-in mic of ASUS VivoBook X507UAR is broken recently by the fix of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working for addressing the regression, too. Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort") Reported-by: Igor Tamara <[email protected]> Closes: https://bugs.debian.org/1108069 Signed-off-by: Salvatore Bonaccorso <[email protected]> Link: https://lore.kernel.org/CADdHDco7_o=4h_epjEAb92Dj-vUz_PoTC2-W9g5ncT2E0NzfeQ@mail.gmail.com Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vijendar Mukunda <[email protected]> Date: Thu May 29 11:08:13 2025 +0530 ALSA: hda: Add new pci id for AMD GPU display HD audio controller [ Upstream commit ab72bfce7647522e01a181e3600c3d14ff5c143e ] Add new pci id for AMD GPU display HD audio controller(device id- 0xab40). Signed-off-by: Vijendar Mukunda <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Cezary Rojewski <[email protected]> Date: Fri May 30 16:13:09 2025 +0200 ALSA: hda: Ignore unsol events for cards being shut down [ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ] For the classic snd_hda_intel driver, codec->card and bus->card point to the exact same thing. When snd_card_diconnect() fires, bus->shutdown is set thanks to azx_dev_disconnect(). card->shutdown is already set when that happens but both provide basically the same functionality. For the DSP snd_soc_avs driver where multiple codecs are located on multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec card may be unregistered while other codecs are still operational. Proper check in form of card->shutdown must be used to verify whether the codec's card is being shut down. Reviewed-by: Amadeusz Sławiński <[email protected]> Signed-off-by: Cezary Rojewski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mario Limonciello <[email protected]> Date: Tue May 27 12:26:56 2025 -0500 ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock [ Upstream commit 4919353c7789b8047e06a9b2b943f775a8f72883 ] The audio controller in the Lenovo Thinkpad Thunderbolt 3 dock doesn't support reading the sampling rate. Add a quirk for it. Suggested-by: Takashi Iwai <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Youngjun Lee <[email protected]> Date: Mon Jun 23 20:05:25 2025 +0900 ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() [ Upstream commit fb4e2a6e8f28a3c0ad382e363aeb9cd822007b8a ] In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor. Signed-off-by: Youngjun Lee <[email protected]> Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support") Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yifan Zhang <[email protected]> Date: Wed May 21 18:06:28 2025 +0800 amd/amdkfd: fix a kfd_process ref leak [ Upstream commit 90237b16ec1d7afa16e2173cc9a664377214cdd9 ] This patch is to fix a kfd_prcess ref leak. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Philip Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dev Jain <[email protected]> Date: Tue May 27 13:56:33 2025 +0530 arm64: Restrict pagetable teardown to avoid false warning commit 650768c512faba8070bf4cfbb28c95eb5cd203f3 upstream. Commit 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()") removes the pxd_present() checks because the caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the caller only checks pud_present(); pud_free_pmd_page() recurses on each pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is possible to hit a warning in the latter, since pmd_none => !pmd_table(). Thus, add a pmd_present() check in pud_free_pmd_page(). This problem was found by code inspection. Fixes: 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()") Cc: [email protected] Reported-by: Ryan Roberts <[email protected]> Acked-by: David Hildenbrand <[email protected]> Signed-off-by: Dev Jain <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Reviewed-by: Anshuman Khandual <[email protected]> Reviewed-by: Ryan Roberts <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Mon Feb 26 12:25:01 2024 +0100 ARM: 9354/1: ptrace: Use bitfield helpers commit b36e78b216e632d90138751e4ff80044de303656 upstream. The isa_mode() macro extracts two fields, and recombines them into a single value. Make this more obvious by using the FIELD_GET() helper, and shifting the result into its final resting place. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Oleg Nesterov <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oliver Schramm <[email protected]> Date: Sun Jun 22 00:30:01 2025 +0200 ASoC: amd: yc: Add DMI quirk for Lenovo IdeaPad Slim 5 15 commit bf39286adc5e10ce3e32eb86ad316ae56f3b52a0 upstream. It's smaller brother has already received the patch to enable the microphone, now add it too to the DMI quirk table. Cc: [email protected] Signed-off-by: Oliver Schramm <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Peng Fan <[email protected]> Date: Mon Mar 24 19:51:29 2025 +0800 ASoC: codec: wcd9335: Convert to GPIO descriptors [ Upstream commit d5099bc1b56417733f4cccf10c61ee74dadd5562 ] of_gpio.h is deprecated, update the driver to use GPIO descriptors. - Use dev_gpiod_get to get GPIO descriptor. - Use gpiod_set_value to configure output value. With legacy of_gpio API, the driver set gpio value 0 to assert reset, and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means output low, set value 0 means output high with gpiod API. The in-tree DTS files have the right polarity set up already so we can expect this to "just work" Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Peng Fan <[email protected]> Link: https://patch.msgid.link/[email protected] Reviewed-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Mark Brown <[email protected]> Stable-dep-of: 9079db287fc3 ("ASoC: codecs: wcd9335: Fix missing free of regulator supplies") Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Mon May 26 11:47:01 2025 +0200 ASoC: codecs: wcd9335: Fix missing free of regulator supplies [ Upstream commit 9079db287fc3e38e040b0edeb0a25770bb679c8e ] Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code. Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-1-0b8a2993b7d3@linaro.org Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Wed Jun 12 18:15:17 2024 +0200 ASoC: codecs: wcd9335: Handle nicer probe deferral and simplify with dev_err_probe() [ Upstream commit 4a03b5dbad466c902d522f3405daa4e5d80578c5 ] wcd9335_parse_dt() function is called only from probe(), so printing errors on resource acquisition is discouraged, because it can pollute dmesg. Use dev_err_probe() to fix this and also make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Stable-dep-of: 9079db287fc3 ("ASoC: codecs: wcd9335: Fix missing free of regulator supplies") Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Fri Jun 20 14:28:44 2025 +0000 atm: clip: prevent NULL deref in clip_push() [ Upstream commit b993ea46b3b601915ceaaf3c802adf11e7d6bac6 ] Blamed commit missed that vcc_destroy_socket() calls clip_push() with a NULL skb. If clip_devs is NULL, clip_push() then crashes when reading skb->truesize. Fixes: 93a2014afbac ("atm: fix a UAF in lec_arp_clear_vccs()") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Cc: Cong Wang <[email protected]> Cc: Gengming Liu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Tue Jun 24 14:45:00 2025 -0700 atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). [ Upstream commit a433791aeaea6e84df709e0b9584b9bbe040cd1c ] syzbot reported a warning below during atm_dev_register(). [0] Before creating a new device and procfs/sysfs for it, atm_dev_register() looks up a duplicated device by __atm_dev_lookup(). These operations are done under atm_dev_mutex. However, when removing a device in atm_dev_deregister(), it releases the mutex just after removing the device from the list that __atm_dev_lookup() iterates over. So, there will be a small race window where the device does not exist on the device list but procfs/sysfs are still not removed, triggering the splat. Let's hold the mutex until procfs/sysfs are removed in atm_dev_deregister(). [0]: proc_dir_entry 'atm/atmtcp:0' already registered WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377 Modules linked in: CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted 6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377 Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48 RSP: 0018:ffffc9000466fa30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817ae248 RDX: ffff888026280000 RSI: ffffffff817ae255 RDI: 0000000000000001 RBP: ffff8880232bed48 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff888076ed2140 R13: dffffc0000000000 R14: ffff888078a61340 R15: ffffed100edda444 FS: 00007f38b3b0c6c0(0000) GS:ffff888124753000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f38b3bdf953 CR3: 0000000076d58000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_create_data+0xbe/0x110 fs/proc/generic.c:585 atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361 atm_dev_register+0x46d/0x890 net/atm/resources.c:113 atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369 atmtcp_attach drivers/atm/atmtcp.c:403 [inline] atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x115/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f38b3b74459 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f38b3b0c198 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f38b3bfe318 RCX: 00007f38b3b74459 RDX: 0000000000000000 RSI: 0000000000006180 RDI: 0000000000000005 RBP: 00007f38b3bfe310 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f38b3bcb0ac R13: 00007f38b3b0c1a0 R14: 0000200000000200 R15: 00007f38b3bcb03b </TASK> Fixes: 64bf69ddff76 ("[ATM]: deregistration removes device from atm_devs list immediately") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/ Tested-by: [email protected] Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Al Viro <[email protected]> Date: Sun Jun 22 18:03:29 2025 -0400 attach_recursive_mnt(): do not lock the covering tree when sliding something under it [ Upstream commit ce7df19686530920f2f6b636e71ce5eb1d9303ef ] If we are propagating across the userns boundary, we need to lock the mounts added there. However, in case when something has already been mounted there and we end up sliding a new tree under that, the stuff that had been there before should not get locked. IOW, lock_mnt_tree() should be called before we reparent the preexisting tree on top of what we are adding. Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies") Signed-off-by: Al Viro <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Linggang Zeng <[email protected]> Date: Tue May 27 13:15:59 2025 +0800 bcache: fix NULL pointer in cache_set_flush() [ Upstream commit 1e46ed947ec658f89f1a910d880cd05e42d3763e ] 1. LINE#1794 - LINE#1887 is some codes about function of bch_cache_set_alloc(). 2. LINE#2078 - LINE#2142 is some codes about function of register_cache_set(). 3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098. 1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb) 1795 { ... 1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) || 1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) || 1862 mempool_init_kmalloc_pool(&c->bio_meta, 2, 1863 sizeof(struct bbio) + sizeof(struct bio_vec) * 1864 bucket_pages(c)) || 1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) || 1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio), 1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) || 1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) || 1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc", 1870 WQ_MEM_RECLAIM, 0)) || 1871 bch_journal_alloc(c) || 1872 bch_btree_cache_alloc(c) || 1873 bch_open_buckets_alloc(c) || 1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages))) 1875 goto err; ^^^^^^^^ 1876 ... 1883 return c; 1884 err: 1885 bch_cache_set_unregister(c); ^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1886 return NULL; 1887 } ... 2078 static const char *register_cache_set(struct cache *ca) 2079 { ... 2098 c = bch_cache_set_alloc(&ca->sb); 2099 if (!c) 2100 return err; ^^^^^^^^^^ ... 2128 ca->set = c; 2129 ca->set->cache[ca->sb.nr_this_dev] = ca; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ... 2138 return NULL; 2139 err: 2140 bch_cache_set_unregister(c); 2141 return err; 2142 } (1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and call bch_cache_set_unregister()(LINE#1885). (2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return. (3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the value to c->cache[], it means that c->cache[] is NULL. LINE#1624 - LINE#1665 is some codes about function of cache_set_flush(). As (1), in LINE#1885 call bch_cache_set_unregister() ---> bch_cache_set_stop() ---> closure_queue() -.-> cache_set_flush() (as below LINE#1624) 1624 static void cache_set_flush(struct closure *cl) 1625 { ... 1654 for_each_cache(ca, c, i) 1655 if (ca->alloc_thread) ^^ 1656 kthread_stop(ca->alloc_thread); ... 1665 } (4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the kernel crash occurred as below: [ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory [ 846.713242] bcache: register_bcache() error : failed to register device [ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered [ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8 [ 846.714790] PGD 0 P4D 0 [ 846.715129] Oops: 0000 [#1] SMP PTI [ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1 [ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018 [ 846.716451] Workqueue: events cache_set_flush [bcache] [ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache] [ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 00 48 85 ff 74 05 e8 b6 58 a2 e1 0f b7 95 3c f7 [ 846.718026] RSP: 0018:ffffb56dcf85fe70 EFLAGS: 00010202 [ 846.718372] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 846.718725] RDX: 0000000000000001 RSI: 0000000040000001 RDI: 0000000000000000 [ 846.719076] RBP: ffffa0ccc0f20df8 R08: ffffa0ce1fedb118 R09: 000073746e657665 [ 846.719428] R10: 8080808080808080 R11: 0000000000000000 R12: ffffa0ce1fee8700 [ 846.719779] R13: ffffa0ccc0f211a8 R14: ffffa0cd1b902840 R15: ffffa0ccc0f20e00 [ 846.720132] FS: 0000000000000000(0000) GS:ffffa0ce1fec0000(0000) knlGS:0000000000000000 [ 846.720726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 846.721073] CR2: 00000000000009f8 CR3: 00000008ba00a005 CR4: 00000000007606e0 [ 846.721426] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 846.721778] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 846.722131] PKRU: 55555554 [ 846.722467] Call Trace: [ 846.722814] process_one_work+0x1a7/0x3b0 [ 846.723157] worker_thread+0x30/0x390 [ 846.723501] ? create_worker+0x1a0/0x1a0 [ 846.723844] kthread+0x112/0x130 [ 846.724184] ? kthread_flush_work_fn+0x10/0x10 [ 846.724535] ret_from_fork+0x35/0x40 Now, check whether that ca is NULL in LINE#1655 to fix the issue. Signed-off-by: Linggang Zeng <[email protected]> Signed-off-by: Mingzhe Zou <[email protected]> Signed-off-by: Coly Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Frédéric Danis <[email protected]> Date: Thu Jun 12 09:50:34 2025 +0200 Bluetooth: L2CAP: Fix L2CAP MTU negotiation commit 042bb9603c44620dce98717a2d23235ca57a00d7 upstream. OBEX download from iPhone is currently slow due to small packet size used to transfer data which doesn't follow the MTU negotiated during L2CAP connection, i.e. 672 bytes instead of 32767: < ACL Data TX: Handle 11 flags 0x00 dlen 12 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 4103 (0x1007) Source CID: 72 > ACL Data RX: Handle 11 flags 0x02 dlen 16 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 14608 Source CID: 72 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 11 flags 0x00 dlen 27 L2CAP: Configure Request (0x04) ident 20 len 19 Destination CID: 14608 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 > ACL Data RX: Handle 11 flags 0x02 dlen 26 L2CAP: Configure Request (0x04) ident 72 len 18 Destination CID: 72 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 65527 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) < ACL Data TX: Handle 11 flags 0x00 dlen 29 L2CAP: Configure Response (0x05) ident 72 len 21 Source CID: 14608 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 > ACL Data RX: Handle 11 flags 0x02 dlen 32 L2CAP: Configure Response (0x05) ident 20 len 24 Source CID: 72 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) ... > ACL Data RX: Handle 11 flags 0x02 dlen 680 Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 1 ReqSeq 2 < ACL Data TX: Handle 11 flags 0x00 dlen 13 Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 2 ReqSeq 2 > ACL Data RX: Handle 11 flags 0x02 dlen 680 Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 2 ReqSeq 3 The MTUs are negotiated for each direction. In this traces 32767 for iPhone->localhost and no MTU for localhost->iPhone, which based on '4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part A): The only parameters that should be included in the L2CAP_CONFIGURATION_REQ packet are those that require different values than the default or previously agreed values. ... Any missing configuration parameters are assumed to have their most recently explicitly or implicitly accepted values. and '5.1 Maximum transmission unit (MTU)': If the remote device sends a positive L2CAP_CONFIGURATION_RSP packet it should include the actual MTU to be used on this channel for traffic flowing into the local device. ... The default value is 672 octets. is set by BlueZ to 672 bytes. It seems that the iPhone used the lowest negotiated value to transfer data to the localhost instead of the negotiated one for the incoming direction. This could be fixed by using the MTU negotiated for the other direction, if exists, in the L2CAP_CONFIGURATION_RSP. This allows to use segmented packets as in the following traces: < ACL Data TX: Handle 11 flags 0x00 dlen 12 L2CAP: Connection Request (0x02) ident 22 len 4 PSM: 4103 (0x1007) Source CID: 72 < ACL Data TX: Handle 11 flags 0x00 dlen 27 L2CAP: Configure Request (0x04) ident 24 len 19 Destination CID: 2832 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 > ACL Data RX: Handle 11 flags 0x02 dlen 26 L2CAP: Configure Request (0x04) ident 15 len 18 Destination CID: 72 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 65527 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) < ACL Data TX: Handle 11 flags 0x00 dlen 29 L2CAP: Configure Response (0x05) ident 15 len 21 Source CID: 2832 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 > ACL Data RX: Handle 11 flags 0x02 dlen 32 L2CAP: Configure Response (0x05) ident 24 len 24 Source CID: 72 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) ... > ACL Data RX: Handle 11 flags 0x02 dlen 1009 Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Start (len 21884) TxSeq 1 ReqSeq 2 > ACL Data RX: Handle 11 flags 0x02 dlen 1009 Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Continuation TxSeq 2 ReqSeq 2 This has been tested with kernel 5.4 and BlueZ 5.77. Cc: [email protected] Signed-off-by: Frédéric Danis <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Michael Chan <[email protected]> Date: Mon Aug 7 07:57:19 2023 -0700 bnxt_en: Fix W=1 warning in bnxt_dcb.c from fortify memcpy() commit ac1b8c978a7acce25a530b02e7b3f0e74ac931c8 upstream. Fix the following warning: inlined from ‘bnxt_hwrm_queue_cos2bw_qcfg’ at drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:165:3, ./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror] __read_overflow2_field(q_size_field, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Modify the FW interface defintion of struct hwrm_queue_cos2bw_qcfg_output to use an array of sub struct for the queue1 to queue7 fields. Note that the layout of the queue0 fields are different and these are not part of the array. This makes the code much cleaner by removing the pointer arithmetic for memcpy(). Link: https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Michael Chan <[email protected]> Date: Mon Aug 7 07:57:20 2023 -0700 bnxt_en: Fix W=stringop-overflow warning in bnxt_dcb.c commit 3d5ecada049f4afdad71be09295c4cd0bbf105c3 upstream. Fix the following warning: drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c: In function ‘bnxt_hwrm_queue_cos2bw_cfg’: cc1: error: writing 12 bytes into a region of size 1 [-Werror=stringop-overflow ] In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:19: drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h:6045:17: note: destination object ‘unused_0’ of size 1 6045 | u8 unused_0; Fix it by modifying struct hwrm_queue_cos2bw_cfg_input to use an array of sub struct similar to the previous patch. This will eliminate the pointer arithmetc to calculate the destination pointer passed to memcpy(). Link: https://lore.kernel.org/netdev/CACKFLinikvXmKcxr4kjWO9TPYxTd2cb5agT1j=w9Qyj5-24s5A@mail.gmail.com/ Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Filipe Manana <[email protected]> Date: Wed May 28 12:28:27 2025 +0100 btrfs: fix a race between renames and directory logging commit 3ca864de852bc91007b32d2a0d48993724f4abad upstream. We have a race between a rename and directory inode logging that if it happens and we crash/power fail before the rename completes, the next time the filesystem is mounted, the log replay code will end up deleting the file that was being renamed. This is best explained following a step by step analysis of an interleaving of steps that lead into this situation. Consider the initial conditions: 1) We are at transaction N; 2) We have directories A and B created in a past transaction (< N); 3) We have inode X corresponding to a file that has 2 hardlinks, one in directory A and the other in directory B, so we'll name them as "A/foo_link1" and "B/foo_link2". Both hard links were persisted in a past transaction (< N); 4) We have inode Y corresponding to a file that as a single hard link and is located in directory A, we'll name it as "A/bar". This file was also persisted in a past transaction (< N). The steps leading to a file loss are the following and for all of them we are under transaction N: 1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir(); 2) Task A starts a rename for inode Y, with the goal of renaming from "A/bar" to "A/baz", so we enter btrfs_rename(); 3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling btrfs_insert_inode_ref(); 4) Because the rename happens in the same directory, we don't set the last_unlink_trans field of directoty A's inode to the current transaction id, that is, we don't cal btrfs_record_unlink_dir(); 5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode() (actually the dir index item is added as a delayed item, but the effect is the same); 6) Now before task A adds the new entry "A/baz" to directory A by calling btrfs_add_link(), another task, task B is logging inode X; 7) Task B starts a fsync of inode X and after logging inode X, at btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since inode X has a last_unlink_trans value of N, set at in step 1; 8) At btrfs_log_all_parents() we search for all parent directories of inode X using the commit root, so we find directories A and B and log them. Bu when logging direct A, we don't have a dir index item for inode Y anymore, neither the old name "A/bar" nor for the new name "A/baz" since the rename has deleted the old name but has not yet inserted the new name - task A hasn't called yet btrfs_add_link() to do that. Note that logging directory A doesn't fallback to a transaction commit because its last_unlink_trans has a lower value than the current transaction's id (see step 4); 9) Task B finishes logging directories A and B and gets back to btrfs_sync_file() where it calls btrfs_sync_log() to persist the log tree; 10) Task B successfully persisted the log tree, btrfs_sync_log() completed with success, and a power failure happened. We have a log tree without any directory entry for inode Y, so the log replay code deletes the entry for inode Y, name "A/bar", from the subvolume tree since it doesn't exist in the log tree and the log tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY item that covers the index range for the dentry that corresponds to "A/bar"). Since there's no other hard link for inode Y and the log replay code deletes the name "A/bar", the file is lost. The issue wouldn't happen if task B synced the log only after task A called btrfs_log_new_name(), which would update the log with the new name for inode Y ("A/bar"). Fix this by pinning the log root during renames before removing the old directory entry, and unpinning after btrfs_log_new_name() is called. Fixes: 259c4b96d78d ("btrfs: stop doing unnecessary log updates during a rename") CC: [email protected] # 5.18+ Reviewed-by: Boris Burkov <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qu Wenruo <[email protected]> Date: Sat Jun 7 09:18:43 2025 +0930 btrfs: handle csum tree error with rescue=ibadroots correctly [ Upstream commit 547e836661554dcfa15c212a3821664e85b4191a ] [BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree. Fixes: abed4aaae4f7 ("btrfs: track the csum, extent, and free space trees in a rb tree") Reported-by: Zhiyu Zhang <[email protected]> Reported-by: Longxing Li <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mark Harmstone <[email protected]> Date: Thu May 29 10:37:44 2025 +0100 btrfs: update superblock's device bytes_used when dropping chunk commit ae4477f937569d097ca5dbce92a89ba384b49bc6 upstream. Each superblock contains a copy of the device item for that device. In a transaction which drops a chunk but doesn't create any new ones, we were correctly updating the device item in the chunk tree but not copying over the new bytes_used value to the superblock. This can be seen by doing the following: # dd if=/dev/zero of=test bs=4096 count=2621440 # mkfs.btrfs test # mount test /root/temp # cd /root/temp # for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done # sync # rm * # sync # btrfs balance start -dusage=0 . # sync # cd # umount /root/temp # btrfs check test For btrfs-check to detect this, you will also need my patch at https://github.com/kdave/btrfs-progs/pull/991. Change btrfs_remove_dev_extents() so that it adds the devices to the fs_info->post_commit_list if they're not there already. This causes btrfs_commit_device_sizes() to be called, which updates the bytes_used value in the superblock. Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Mark Harmstone <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dmitry Kandybka <[email protected]> Date: Tue Apr 22 12:32:04 2025 +0300 ceph: fix possible integer overflow in ceph_zero_objects() [ Upstream commit 0abd87942e0c93964e93224836944712feba1d91 ] In 'ceph_zero_objects', promote 'object_size' to 'u64' to avoid possible integer overflow. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Kandybka <[email protected]> Reviewed-by: Viacheslav Dubeyko <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pali Rohár <[email protected]> Date: Sat Nov 2 17:58:31 2024 +0100 cifs: Correctly set SMB1 SessionKey field in Session Setup Request [ Upstream commit 89381c72d52094988e11d23ef24a00066a0fa458 ] [MS-CIFS] specification in section 2.2.4.53.1 where is described SMB_COM_SESSION_SETUP_ANDX Request, for SessionKey field says: The client MUST set this field to be equal to the SessionKey field in the SMB_COM_NEGOTIATE Response for this SMB connection. Linux SMB client currently set this field to zero. This is working fine against Windows NT SMB servers thanks to [MS-CIFS] product behavior <94>: Windows NT Server ignores the client's SessionKey. For compatibility with [MS-CIFS], set this SessionKey field in Session Setup Request to value retrieved from Negotiate response. Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pali Rohár <[email protected]> Date: Tue Dec 31 16:06:22 2024 +0100 cifs: Fix cifs_query_path_info() for Windows NT servers [ Upstream commit a3e771afbb3bce91c8296828304903e7348003fe ] For TRANS2 QUERY_PATH_INFO request when the path does not exist, the Windows NT SMB server returns error response STATUS_OBJECT_NAME_NOT_FOUND or ERRDOS/ERRbadfile without the SMBFLG_RESPONSE flag set. Similarly it returns STATUS_DELETE_PENDING when the file is being deleted. And looks like that any error response from TRANS2 QUERY_PATH_INFO does not have SMBFLG_RESPONSE flag set. So relax check in check_smb_hdr() for detecting if the packet is response for this special case. This change fixes stat() operation against Windows NT SMB servers and also all operations which depends on -ENOENT result from stat like creat() or mkdir(). Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: James Clark <[email protected]> Date: Tue Mar 25 11:58:47 2025 +0000 coresight: Only check bottom two claim bits [ Upstream commit a4e65842e1142aa18ef36113fbd81d614eaefe5a ] The use of the whole register and == could break the claim mechanism if any of the other bits are used in the future. The referenced doc "PSCI - ARM DEN 0022D" also says to only read and clear the bottom two bits. Use FIELD_GET() to extract only the relevant part. Reviewed-by: Leo Yan <[email protected]> Reviewed-by: Yeoreum Yun <[email protected]> Signed-off-by: James Clark <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Heinz Mauelshagen <[email protected]> Date: Tue Jun 10 20:53:30 2025 +0200 dm-raid: fix variable in journal device check commit db53805156f1e0aa6d059c0d3f9ac660d4ef3eb4 upstream. Replace "rdev" with correct loop variable name "r". Signed-off-by: Heinz Mauelshagen <[email protected]> Cc: [email protected] Fixes: 63c32ed4afc2 ("dm raid: add raid4/5/6 journaling support") Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Gessler <[email protected]> Date: Wed May 7 20:21:01 2025 +0200 dmaengine: xilinx_dma: Set dma_device directions [ Upstream commit 7e01511443c30a55a5ae78d3debd46d4d872517e ] Coalesce the direction bits from the enabled TX and/or RX channels into the directions bit mask of dma_device. Without this mask set, dma_get_slave_caps() in the DMAEngine fails, which prevents the driver from being used with an IIO DMAEngine buffer. Signed-off-by: Thomas Gessler <[email protected]> Reviewed-by: Suraj Gupta <[email protected]> Tested-by: Folker Schwesinger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guilherme G. Piccoli <[email protected]> Date: Fri Aug 19 19:17:30 2022 -0300 drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers [ Upstream commit d786e00d19f9fc80c2239a07643b08ea75b8b364 ] Currently Hyper-V guests are among the most relevant users of the panic infrastructure, like panic notifiers, kmsg dumpers, etc. The reasons rely both in cleaning-up procedures (closing hypervisor <-> guest connection, disabling some paravirtualized timer) as well as to data collection (sending panic information to the hypervisor) and framebuffer management. The thing is: some notifiers are related to others, ordering matters, some functionalities are duplicated and there are lots of conditionals behind sending panic information to the hypervisor. As part of an effort to clean-up the panic notifiers mechanism and better document things, we hereby address some of the issues/complexities of Hyper-V panic handling through the following changes: (a) We have die and panic notifiers on vmbus_drv.c and both have goals of sending panic information to the hypervisor, though the panic notifier is also responsible for a cleaning-up procedure. This commit clears the code by splitting the panic notifier in two, one for closing the vmbus connection whereas the other is only for sending panic info to hypervisor. With that, it was possible to merge the die and panic notifiers in a single/well-documented function, and clear some conditional complexities on sending such information to the hypervisor. (b) There is a Hyper-V framebuffer panic notifier, which relies in doing a vmbus operation that demands a valid connection. So, we must order this notifier with the panic notifier from vmbus_drv.c, to guarantee that the framebuffer code executes before the vmbus connection is unloaded. Also, this commit removes a useless header. Although there is code rework and re-ordering, we expect that this change has no functional regressions but instead optimize the path and increase panic reliability on Hyper-V. This was tested on Hyper-V with success. Cc: Andrea Parri (Microsoft) <[email protected]> Cc: Dexuan Cui <[email protected]> Cc: Haiyang Zhang <[email protected]> Cc: "K. Y. Srinivasan" <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: Tianyu Lan <[email protected]> Cc: Wei Liu <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Tested-by: Fabio A M Martins <[email protected]> Signed-off-by: Guilherme G. Piccoli <[email protected]> Tested-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Stable-dep-of: 09eea7ad0b8e ("Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary") Signed-off-by: Sasha Levin <[email protected]>
Author: Long Li <[email protected]> Date: Mon May 5 17:56:33 2025 -0700 Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary [ Upstream commit 09eea7ad0b8e973dcf5ed49902838e5d68177f8e ] There are use cases that interrupt and monitor pages are mapped to user-mode through UIO, so they need to be system page aligned. Some Hyper-V allocation APIs introduced earlier broke those requirements. Fix this by using page allocation functions directly for interrupt and monitor pages. Cc: [email protected] Fixes: ca48739e59df ("Drivers: hv: vmbus: Move Hyper-V page allocator to arch neutral code") Signed-off-by: Long Li <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Message-ID: <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kameron Carr <[email protected]> Date: Fri Jun 23 15:09:49 2023 -0700 Drivers: hv: Change hv_free_hyperv_page() to take void * argument [ Upstream commit a6fe043880820981f6e4918240f967ea79bb063e ] Currently hv_free_hyperv_page() takes an unsigned long argument, which is inconsistent with the void * return value from the corresponding hv_alloc_hyperv_page() function and variants. This creates unnecessary extra casting. Change the hv_free_hyperv_page() argument type to void *. Also remove redundant casts from invocations of hv_alloc_hyperv_page() and variants. Signed-off-by: Kameron Carr <[email protected]> Reviewed-by: Nuno Das Neves <[email protected]> Reviewed-by: Dexuan Cui <[email protected]> Link: https://lore.kernel.org/r/1687558189-19734-1-git-send-email-kameroncarr@linux.microsoft.com Signed-off-by: Wei Liu <[email protected]> Stable-dep-of: 09eea7ad0b8e ("Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary") Signed-off-by: Sasha Levin <[email protected]>
Author: Long Li <[email protected]> Date: Thu Apr 20 15:49:06 2023 -0700 Drivers: hv: move panic report code from vmbus to hv early init code [ Upstream commit 9c318a1d9b5000c77527011f158a75c5483510f5 ] The panic reporting code was added in commit 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") It was added to the vmbus driver. The panic reporting has no dependence on vmbus, and can be enabled at an earlier boot time when Hyper-V is initialized. This patch moves the panic reporting code out of vmbus. There is no functionality changes. During moving, also refactored some cleanup functions into hv_kmsg_dump_unregister(). Signed-off-by: Long Li <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Stable-dep-of: 09eea7ad0b8e ("Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary") Signed-off-by: Sasha Levin <[email protected]>
Author: Saurabh Sengar <[email protected]> Date: Sat Mar 30 01:51:57 2024 -0700 Drivers: hv: vmbus: Add utility function for querying ring size [ Upstream commit e8c4bd6c6e6b7e7b416c42806981c2a81370001e ] Add a function to query for the preferred ring buffer size of VMBus device. This will allow the drivers (eg. UIO) to allocate the most optimized ring buffer size for devices. Signed-off-by: Saurabh Sengar <[email protected]> Reviewed-by: Long Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 0315fef2aff9 ("uio_hv_generic: Align ring size to system page") Signed-off-by: Sasha Levin <[email protected]>
Author: Rick Edgecombe <[email protected]> Date: Mon Mar 11 09:15:54 2024 -0700 Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails [ Upstream commit 03f5a999adba062456c8c818a683beb1b498983a ] In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. VMBus code could free decrypted pages if set_memory_encrypted()/decrypted() fails. Leak the pages if this happens. Signed-off-by: Rick Edgecombe <[email protected]> Signed-off-by: Michael Kelley <[email protected]> Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Message-ID: <[email protected]> Stable-dep-of: 09eea7ad0b8e ("Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary") Signed-off-by: Sasha Levin <[email protected]>
Author: Michael Kelley <[email protected]> Date: Sun Mar 26 06:52:03 2023 -0700 Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages [ Upstream commit a5ddb74588213c31ce993a8e9a09d1ffdc11a142 ] With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), creating a second kernel virtual mapping for shared memory is no longer necessary. Everything needed for the transition to shared is handled by set_memory_decrypted(). As such, remove the code to create and manage the second mapping for VMBus monitor pages. Because set_memory_decrypted() and set_memory_encrypted() are no-ops in normal VMs, it's not even necessary to test for being in a Confidential VM (a.k.a., "Isolation VM"). Signed-off-by: Michael Kelley <[email protected]> Reviewed-by: Tianyu Lan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Stable-dep-of: 09eea7ad0b8e ("Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary") Signed-off-by: Sasha Levin <[email protected]>
Author: Wentao Liang <[email protected]> Date: Mon May 26 10:37:31 2025 +0800 drm/amd/display: Add null pointer check for get_first_active_display() commit c3e9826a22027a21d998d3e64882fa377b613006 upstream. The function mod_hdcp_hdcp1_enable_encryption() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference in mod_hdcp_hdcp2_enable_encryption(). Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix") Signed-off-by: Wentao Liang <[email protected]> Reviewed-by: Alex Hung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # v5.8 Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Frank Min <[email protected]> Date: Wed Jun 4 21:00:44 2025 +0800 drm/amdgpu: Add kicker device detection commit 0bbf5fd86c585d437b75003f11365b324360a5d6 upstream. 1. add kicker device list 2. add kicker device checking helper function Signed-off-by: Frank Min <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 09aa2b408f4ab689c3541d22b0968de0392ee406) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: John Olender <[email protected]> Date: Tue Apr 29 07:24:28 2025 -0400 drm/amdgpu: amdgpu_vram_mgr_new(): Clamp lpfn to total vram commit 4d2f6b4e4c7ed32e7fa39fcea37344a9eab99094 upstream. The drm_mm allocator tolerated being passed end > mm->size, but the drm_buddy allocator does not. Restore the pre-buddy-allocator behavior of allowing such placements. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3448 Signed-off-by: John Olender <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Arunpravin Paneer Selvam <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jay Cornwall <[email protected]> Date: Wed Jun 11 09:52:14 2025 -0500 drm/amdkfd: Fix race in GWS queue scheduling commit cfb05257ae168a0496c7637e1d9e3ab8a25cbffe upstream. q->gws is not updated atomically with qpd->mapped_gws_queue. If a runlist is created between pqm_set_gws and update_queue it will contain a queue which uses GWS in a process with no GWS allocated. This will result in a scheduler hang. Use q->properties.is_gws which is changed while holding the DQM lock. Signed-off-by: Jay Cornwall <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit b98370220eb3110e82248e3354e16a489a492cfb) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Aradhya Bhatia <[email protected]> Date: Sat Mar 29 17:09:15 2025 +0530 drm/bridge: cdns-dsi: Check return value when getting default PHY config commit c6a7ef0d4856b9629df390e9935d7fd67fe39f81 upstream. Check for the return value of the phy_mipi_dphy_get_default_config() call, and in case of an error, return back the same. Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Cc: [email protected] Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Tomi Valkeinen <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Aradhya Bhatia <[email protected]> Date: Sat Mar 29 17:09:12 2025 +0530 drm/bridge: cdns-dsi: Fix connecting to next bridge commit 688eb4d465484bc2a3471a6a6f06f833b58c7867 upstream. Fix the OF node pointer passed to the of_drm_find_bridge() call to find the next bridge in the display chain. The code to find the next panel (and create its panel-bridge) works fine, but to find the next (non-panel) bridge does not. To find the next bridge in the pipeline, we need to pass "np" - the OF node pointer of the next entity in the devicetree chain. Passing "of_node" to of_drm_find_bridge (which is what the code does currently) will fetch the bridge for the cdns-dsi which is not what's required. Fix that. Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver") Cc: [email protected] Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Tested-by: Tomi Valkeinen <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Aradhya Bhatia <[email protected]> Date: Sat Mar 29 17:09:13 2025 +0530 drm/bridge: cdns-dsi: Fix phy de-init and flag it so commit fd2611c13f69cbbc6b81d9fc7502abf4f7031d21 upstream. The driver code doesn't have a Phy de-initialization path as yet, and so it does not clear the phy_initialized flag while suspending. This is a problem because after resume the driver looks at this flag to determine if a Phy re-initialization is required or not. It is in fact required because the hardware is resuming from a suspend, but the driver does not carry out any re-initialization causing the D-Phy to not work at all. Call the counterparts of phy_init() and phy_power_on(), that are phy_exit() and phy_power_off(), from _bridge_post_disable(), and clear the flags so that the Phy can be initialized again when required. Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Cc: [email protected] Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Tested-by: Tomi Valkeinen <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Aradhya Bhatia <[email protected]> Date: Sat Mar 29 17:09:14 2025 +0530 drm/bridge: cdns-dsi: Fix the clock variable for mode_valid() commit 132bdcec399be6ae947582249a134b38cf56731c upstream. The crtc_* mode parameters do not get generated (duplicated in this case) from the regular parameters before the mode validation phase begins. The rest of the code conditionally uses the crtc_* parameters only during the bridge enable phase, but sticks to the regular parameters for mode validation. In this singular instance, however, the driver tries to use the crtc_clock parameter even during the mode validation, causing the validation to fail. Allow the D-Phy config checks to use mode->clock instead of mode->crtc_clock during mode_valid checks, like everywhere else in the driver. Fixes: fced5a364dee ("drm/bridge: cdns: Convert to phy framework") Cc: [email protected] Reviewed-by: Tomi Valkeinen <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Tomi Valkeinen <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Aradhya Bhatia <[email protected]> Date: Sat Mar 29 17:09:16 2025 +0530 drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready commit 47c03e6660e96cbba0239125b1d4a9db3c724b1d upstream. Once the DSI Link and DSI Phy are initialized, the code needs to wait for Clk and Data Lanes to be ready, before continuing configuration. This is in accordance with the DSI Start-up procedure, found in the Technical Reference Manual of Texas Instrument's J721E SoC[0] which houses this DSI TX controller. If the previous bridge (or crtc/encoder) are configured pre-maturely, the input signal FIFO gets corrupt. This introduces a color-shift on the display. Allow the driver to wait for the clk and data lanes to get ready during DSI enable. [0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM TRM Link: http://www.ti.com/lit/pdf/spruil1 Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver") Cc: [email protected] Tested-by: Dominik Haller <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Tested-by: Tomi Valkeinen <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Signed-off-by: Aradhya Bhatia <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jayesh Choudhary <[email protected]> Date: Tue Jun 24 10:18:35 2025 +0530 drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type [ Upstream commit 55e8ff842051b1150461d7595d8f1d033c69d66b ] By default, HPD was disabled on SN65DSI86 bridge. When the driver was added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable call which was moved to other function calls subsequently. Later on, commit "c312b0df3b13" added detect utility for DP mode. But with HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced state always return 1 (always connected state). Set HPD_DISABLE bit conditionally based on display sink's connector type. Since the HPD_STATE is reflected correctly only after waiting for debounce time (~100-400ms) and adding this delay in detect() is not feasible owing to the performace impact (glitches and frame drop), remove runtime calls in detect() and add hpd_enable()/disable() bridge hooks with runtime calls, to detect hpd properly without any delay. [0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32) Fixes: c312b0df3b13 ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP") Cc: Max Krummenacher <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Tested-by: Ernest Van Hoecke <[email protected]> Signed-off-by: Jayesh Choudhary <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Wolfram Sang <[email protected]> Date: Sat Mar 15 21:15:11 2025 +0100 drm/bridge: ti-sn65dsi86: make use of debugfs_init callback [ Upstream commit 1d1f7b15cb9c11974cebfd39da51dc69b8cb31ff ] Do not create a custom directory in debugfs-root, but use the debugfs_init callback to create a custom directory at the given place for the bridge. The new directory layout looks like this on a Renesas GrayHawk-Single with a R-Car V4M SoC: /sys/kernel/debug/dri/feb00000.display/DP-1/1-002c Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Stable-dep-of: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type") Signed-off-by: Sasha Levin <[email protected]>
Author: Maíra Canal <[email protected]> Date: Mon Jun 2 10:22:16 2025 -0300 drm/etnaviv: Protect the scheduler's pending list with its lock commit 61ee19dedb8d753249e20308782bf4e9e2fb7344 upstream. Commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active") ensured that active jobs are returned to the pending list when extending the timeout. However, it didn't use the pending list's lock to manipulate the list, which causes a race condition as the scheduler's workqueues are running. Hold the lock while manipulating the scheduler's pending list to prevent a race. Cc: [email protected] Fixes: 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active") Reported-by: Philipp Stanner <[email protected]> Closes: https://lore.kernel.org/dri-devel/[email protected]/ Reviewed-by: Lucas Stach <[email protected]> Reviewed-by: Philipp Stanner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maíra Canal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ville Syrjälä <[email protected]> Date: Mon May 12 21:22:15 2025 +0200 drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1 [ Upstream commit 25eeba495b2fc16037647c1a51bcdf6fc157af5c ] The intel-media-driver is currently broken on DG1 because it uses EXEC_CAPTURE with recovarable contexts. Relax the check to allow that. I've also submitted a fix for the intel-media-driver: https://github.com/intel/media-driver/pull/1920 Cc: [email protected] # v6.0+ Cc: Matthew Auld <[email protected]> Cc: Thomas Hellström <[email protected]> Testcase: igt/gem_exec_capture/capture-invisible Fixes: 71b1669ea9bd ("drm/i915/uapi: tweak error capture on recoverable contexts") Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] (cherry picked from commit d6e020819612a4a06207af858e0978be4d3e3140) Signed-off-by: Joonas Lahtinen <[email protected]> Stable-dep-of: ed5915cfce2a ("Revert "drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1"") Signed-off-by: Sasha Levin <[email protected]>
Author: Stephan Gerhold <[email protected]> Date: Tue Apr 29 10:33:56 2025 +0200 drm/msm/gpu: Fix crash when throttling GPU immediately during boot commit b71717735be48d7743a34897e9e44a0b53e30c0e upstream. There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Cc: [email protected] Fixes: 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy") Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/650772/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thierry Reding <[email protected]> Date: Mon Apr 21 11:13:05 2025 -0500 drm/tegra: Assign plane type before registration commit 9ff4fdf4f44b69237c0afc1d3a8dac916ce66f3e upstream. Changes to a plane's type after it has been registered aren't propagated to userspace automatically. This could possibly be achieved by updating the property, but since we can already determine which type this should be before the registration, passing in the right type from the start is a much better solution. Suggested-by: Aaron Kling <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Cc: [email protected] Fixes: 473079549f27 ("drm/tegra: dc: Add Tegra186 support") Signed-off-by: Aaron Kling <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qiu-ji Chen <[email protected]> Date: Wed Nov 6 17:59:06 2024 +0800 drm/tegra: Fix a possible null pointer dereference commit 780351a5f61416ed2ba1199cc57e4a076fca644d upstream. In tegra_crtc_reset(), new memory is allocated with kzalloc(), but no check is performed. Before calling __drm_atomic_helper_crtc_reset, state should be checked to prevent possible null pointer dereference. Fixes: b7e0b04ae450 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.") Cc: [email protected] Signed-off-by: Qiu-ji Chen <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Zimmermann <[email protected]> Date: Mon Mar 3 15:52:56 2025 +0100 drm/udl: Unregister device before cleaning up on disconnect commit ff9cb6d2035c586ea7c8f1754d4409eec7a2d26d upstream. Disconnecting a DisplayLink device results in the following kernel error messages [ 93.041748] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115 [ 93.055299] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe [ 93.065363] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115 [ 93.078207] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe coming from KMS poll helpers. Shutting down poll helpers runs them one final time when the USB device is already gone. Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's polling code already handles disconnects gracefully if the device has been marked as unplugged. Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: b1a981bd5576 ("drm/udl: drop drm_driver.release hook") Cc: [email protected] Cc: <[email protected]> # v5.8+ Reviewed-by: Patrik Jakobsson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yao Zi <[email protected]> Date: Mon Jun 23 09:34:45 2025 +0000 dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive commit 09812134071b3941fb81def30b61ed36d3a5dfb5 upstream. The 8250 binding before converting to json-schema states, - clock-frequency : the input clock frequency for the UART or - clocks phandle to refer to the clk used as per Documentation/devicetree for clock-related properties, where "or" indicates these properties shouldn't exist at the same time. Additionally, the behavior of Linux's driver is strange when both clocks and clock-frequency are specified: it ignores clocks and obtains the frequency from clock-frequency, left the specified clocks unclaimed. It may even be disabled, which is undesired most of the time. But "anyOf" doesn't prevent these two properties from coexisting, as it considers the object valid as long as there's at LEAST one match. Let's switch to "oneOf" and disallows the other property if one exists, precisely matching the original binding and avoiding future confusion on the driver's behavior. Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Cc: stable <[email protected]> Signed-off-by: Yao Zi <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Zimmermann <[email protected]> Date: Tue May 20 09:14:00 2025 +0200 dummycon: Trigger redraw when switching consoles with deferred takeover [ Upstream commit 03bcbbb3995ba5df43af9aba45334e35f2dfe27b ] Signal vt subsystem to redraw console when switching to dummycon with deferred takeover enabled. Makes the console switch to fbcon and displays the available output. With deferred takeover enabled, dummycon acts as the placeholder until the first output to the console happens. At that point, fbcon takes over. If the output happens while dummycon is not active, it cannot inform fbcon. This is the case if the vt subsystem runs in graphics mode. A typical graphical boot starts plymouth, a display manager and a compositor; all while leaving out dummycon. Switching to a text-mode console leaves the console with dummycon even if a getty terminal has been started. Returning true from dummycon's con_switch helper signals the vt subsystem to redraw the screen. If there's output available dummycon's con_putc{s} helpers trigger deferred takeover of fbcon, which sets a display mode and displays the output. If no output is available, dummycon remains active. v2: - make the comment slightly more verbose (Javier) Signed-off-by: Thomas Zimmermann <[email protected]> Reported-by: Andrei Borzenkov <[email protected]> Closes: https://bugzilla.suse.com/show_bug.cgi?id=1242191 Tested-by: Andrei Borzenkov <[email protected]> Acked-by: Javier Martinez Canillas <[email protected]> Fixes: 83d83bebf401 ("console/fbcon: Add support for deferred console takeover") Cc: Hans de Goede <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v4.19+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Jakub Kicinski <[email protected]> Date: Thu Jul 27 12:07:25 2023 -0700 eth: bnxt: fix one of the W=1 warnings about fortified memcpy() commit 833c4a8105ac8c2df42ec061be09a5a682454f69 upstream. Fix a W=1 warning with gcc 13.1: In function ‘fortify_memcpy_chk’, inlined from ‘bnxt_hwrm_queue_cos2bw_cfg’ at drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:133:3: include/linux/fortify-string.h:592:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 592 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The field group is already defined and starts at queue_id: struct bnxt_cos2bw_cfg { u8 pad[3]; struct_group_attr(cfg, __packed, u8 queue_id; __le32 min_bw; Reviewed-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chao Yu <[email protected]> Date: Tue May 13 19:25:38 2025 +0800 f2fs: don't over-report free space or inodes in statvfs [ Upstream commit a9201960623287927bf5776de3f70fb2fbde7e02 ] This fixes an analogus bug that was fixed in modern filesystems: a) xfs in commit 4b8d867ca6e2 ("xfs: don't over-report free space or inodes in statvfs") b) ext4 in commit f87d3af74193 ("ext4: don't over-report free space or inodes in statvfs") where statfs can report misleading / incorrect information where project quota is enabled, and the free space is less than the remaining quota. This commit will resolve a test failure in generic/762 which tests for this bug. generic/762 - output mismatch (see /share/git/fstests/results//generic/762.out.bad) # --- tests/generic/762.out 2025-04-15 10:21:53.371067071 +0800 # +++ /share/git/fstests/results//generic/762.out.bad 2025-05-13 16:13:37.000000000 +0800 # @@ -6,8 +6,10 @@ # root blocks2 is in range # dir blocks2 is in range # root bavail2 is in range # -dir bavail2 is in range # +dir bavail2 has value of 1539066 # +dir bavail2 is NOT in range 304734.87 .. 310891.13 # root blocks3 is in range # ... # (Run 'diff -u /share/git/fstests/tests/generic/762.out /share/git/fstests/results//generic/762.out.bad' to see the entire diff) HINT: You _MAY_ be missing kernel fix: XXXXXXXXXXXXXX xfs: don't over-report free space or inodes in statvfs Cc: [email protected] Fixes: ddc34e328d06 ("f2fs: introduce f2fs_statfs_project") Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Murad Masimov <[email protected]> Date: Mon Apr 28 18:34:06 2025 +0300 fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var [ Upstream commit 17186f1f90d34fa701e4f14e6818305151637b9e ] If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: [email protected] Signed-off-by: Murad Masimov <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chen Ni <[email protected]> Date: Mon Sep 2 15:44:02 2024 +0800 fbdev: hyperv_fb: Convert comma to semicolon commit 27f22f897095b09df32bf689b63624d23b0c8ebc upstream. Replace a comma between expression statements by a semicolon. Fixes: d786e00d19f9 ("drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers") Signed-off-by: Chen Ni <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Cristian Marussi <[email protected]> Date: Mon Feb 12 12:32:24 2024 +0000 firmware: arm_scmi: Add a common helper to check if a message is supported commit 637b6d6cae9c42db5a9525da67c991294924d2cd upstream. A common helper is provided to check if a specific protocol message is supported or not. Signed-off-by: Cristian Marussi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sibi Sankar <[email protected]> Date: Tue Apr 29 15:11:06 2025 +0100 firmware: arm_scmi: Ensure that the message-id supports fastchannel commit 94a263f981a3fa3d93f65c31e0fed0756736be43 upstream. Currently the perf and powercap protocol relies on the protocol domain attributes, which just ensures that one fastchannel per domain, before instantiating fastchannels for all possible message-ids. Fix this by ensuring that each message-id supports fastchannel before initialization. Logs: | scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:0] - ret:-95. Using regular messaging | scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:1] - ret:-95. Using regular messaging | scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:2] - ret:-95. Using regular messaging CC: [email protected] Reported-by: Johan Hovold <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Fixes: 6f9ea4dabd2d ("firmware: arm_scmi: Generalize the fast channel support") Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Signed-off-by: Sibi Sankar <[email protected]> [Cristian: Modified the condition checked to establish support or not] Signed-off-by: Cristian Marussi <[email protected]> Message-Id: <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dave Kleikamp <[email protected]> Date: Thu Feb 20 10:31:19 2025 -0600 fs/jfs: consolidate sanity checking in dbMount [ Upstream commit 0d250b1c52484d489e31df2cf9118b7c4bd49d31 ] Sanity checks have been added to dbMount as individual if clauses with identical error handling. Move these all into one clause. Signed-off-by: Dave Kleikamp <[email protected]> Stable-dep-of: 37bfb464ddca ("jfs: validate AG parameters in dbMount() to prevent crashes") Signed-off-by: Sasha Levin <[email protected]>
Author: Gustavo A. R. Silva <[email protected]> Date: Fri Jul 14 13:56:37 2023 -0600 fs: omfs: Use flexible-array member in struct omfs_extent commit 4d8cbf6dbcdaebe949461b0a933ae4c71cb53edc upstream. Memory for 'struct omfs_extent' and a 'e_extent_count' number of extent entries is indirectly allocated through 'bh->b_data', which is a pointer to data within the page. This implies that the member 'e_entry' (which is the start of extent entries) functions more like an array than a single object of type 'struct omfs_extent_entry'. So we better turn this object into a proper array, in this case a flexible-array member, and with that, fix the following -Wstringop-overflow warning seen after building s390 architecture with allyesconfig (GCC 13): fs/omfs/file.c: In function 'omfs_grow_extent': include/linux/fortify-string.h:57:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=] 57 | #define __underlying_memcpy __builtin_memcpy | ^ include/linux/fortify-string.h:648:9: note: in expansion of macro '__underlying_memcpy' 648 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ include/linux/fortify-string.h:693:26: note: in expansion of macro '__fortify_memcpy_chk' 693 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ fs/omfs/file.c:170:9: note: in expansion of macro 'memcpy' 170 | memcpy(terminator, entry, sizeof(struct omfs_extent_entry)); | ^~~~~~ In file included from fs/omfs/omfs.h:8, from fs/omfs/file.c:11: fs/omfs/omfs_fs.h:80:34: note: at offset 16 into destination object 'e_entry' of size 16 80 | struct omfs_extent_entry e_entry; /* start of extent entries */ | ^~~~~~~ There are some binary differences before and after changes, but this are expected due to the change in the size of 'struct omfs_extent' and the necessary adjusments. This helps with the ongoing efforts to globally enable -Wstringop-overflow. Link: https://github.com/KSPP/linux/issues/330 Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Iusico Maxim <[email protected]> Date: Thu Jun 5 19:55:50 2025 +0200 HID: lenovo: Restrict F7/9/11 mode to compact keyboards only commit 9327e3ee5b077c4ab4495a09b67624f670ed88b6 upstream. Commit 2f2bd7cbd1d1 ("hid: lenovo: Resend all settings on reset_resume for compact keyboards") introduced a regression for ThinkPad TrackPoint Keyboard II by removing the conditional check for enabling F7/9/11 mode needed for compact keyboards only. As a result, the non-compact keyboards can no longer toggle Fn-lock via Fn+Esc, although it can be controlled via sysfs knob that directly sends raw commands. This patch restores the previous conditional check without any additions. Cc: [email protected] Fixes: 2f2bd7cbd1d1 ("hid: lenovo: Resend all settings on reset_resume for compact keyboards") Signed-off-by: Iusico Maxim <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qasim Ijaz <[email protected]> Date: Fri Jun 6 19:49:59 2025 +0100 HID: wacom: fix kobject reference count leak commit 85a720f4337f0ddf1603c8b75a8f1ffbbe022ef9 upstream. When sysfs_create_files() fails in wacom_initialize_remotes() the error is returned and the cleanup action will not have been registered yet. As a result the kobject???s refcount is never dropped, so the kobject can never be freed leading to a reference leak. Fix this by calling kobject_put() before returning. Fixes: 83e6b40e2de6 ("HID: wacom: EKR: have the wacom resources dynamically allocated") Acked-by: Ping Cheng <[email protected]> Cc: [email protected] Signed-off-by: Qasim Ijaz <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qasim Ijaz <[email protected]> Date: Fri Jun 6 19:49:57 2025 +0100 HID: wacom: fix memory leak on kobject creation failure commit 5ae416c5b1e2e816aee7b3fc8347adf70afabb4c upstream. During wacom_initialize_remotes() a fifo buffer is allocated with kfifo_alloc() and later a cleanup action is registered during devm_add_action_or_reset() to clean it up. However if the code fails to create a kobject and register it with sysfs the code simply returns -ENOMEM before the cleanup action is registered leading to a memory leak. Fix this by ensuring the fifo is freed when the kobject creation and registration process fails. Fixes: 83e6b40e2de6 ("HID: wacom: EKR: have the wacom resources dynamically allocated") Reviewed-by: Ping Cheng <[email protected]> Cc: [email protected] Signed-off-by: Qasim Ijaz <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qasim Ijaz <[email protected]> Date: Fri Jun 6 19:49:58 2025 +0100 HID: wacom: fix memory leak on sysfs attribute creation failure commit 1a19ae437ca5d5c7d9ec2678946fb339b1c706bf upstream. When sysfs_create_files() fails during wacom_initialize_remotes() the fifo buffer is not freed leading to a memory leak. Fix this by calling kfifo_free() before returning. Fixes: 83e6b40e2de6 ("HID: wacom: EKR: have the wacom resources dynamically allocated") Reviewed-by: Ping Cheng <[email protected]> Cc: [email protected] Signed-off-by: Qasim Ijaz <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alexis Czezar Torreno <[email protected]> Date: Mon Apr 7 11:47:24 2025 +0800 hwmon: (pmbus/max34440) Fix support for max34451 [ Upstream commit 19932f844f3f51646f762f3eac4744ec3a405064 ] The max344** family has an issue with some PMBUS address being switched. This includes max34451 however version MAX34451-NA6 and later has this issue fixed and this commit supports that update. Signed-off-by: Alexis Czezar Torreno <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Wolfram Sang <[email protected]> Date: Thu May 22 08:42:35 2025 +0200 i2c: robotfuzz-osif: disable zero-length read messages commit 56ad91c1aa9c18064348edf69308080b03c9dc48 upstream. This driver passes the length of an i2c_msg directly to usb_control_msg(). If the message is now a read and of length 0, it violates the USB protocol and a warning will be printed. Enable the I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length read messages altogether. Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Signed-off-by: Wolfram Sang <[email protected]> Cc: <[email protected]> # v3.14+ Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wolfram Sang <[email protected]> Date: Thu May 22 08:43:49 2025 +0200 i2c: tiny-usb: disable zero-length read messages commit cbdb25ccf7566eee0c2b945e35cb98baf9ed0aa6 upstream. This driver passes the length of an i2c_msg directly to usb_control_msg(). If the message is now a read and of length 0, it violates the USB protocol and a warning will be printed. Enable the I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length read messages altogether. Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver") Signed-off-by: Wolfram Sang <[email protected]> Cc: <[email protected]> # v2.6.22+ Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Purva Yeshi <[email protected]> Date: Thu Apr 10 22:34:08 2025 +0530 iio: adc: ad_sigma_delta: Fix use of uninitialized status_pos [ Upstream commit e5cdb098a3cb165d52282ffc3a6448642953ea13 ] Fix Smatch-detected issue: drivers/iio/adc/ad_sigma_delta.c:604 ad_sd_trigger_handler() error: uninitialized symbol 'status_pos'. The variable `status_pos` was only initialized in specific switch cases (1, 2, 3, 4), which could leave it uninitialized if `reg_size` had an unexpected value. Fix by adding a default case to the switch block to catch unexpected values of `reg_size`. Use `dev_err_ratelimited()` for error logging and `goto irq_handled` instead of returning early. Signed-off-by: Purva Yeshi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonathan Cameron <[email protected]> Date: Sun Apr 13 11:34:41 2025 +0100 iio: pressure: zpa2326: Use aligned_s64 for the timestamp [ Upstream commit 886a446b76afddfad307488e95e87f23a08ffd51 ] On x86_32 s64 fields are only 32-bit aligned. Hence force the alignment of the field and padding in the structure by using aligned_s64 instead. Reviewed-by: David Lechner <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pavel Begunkov <[email protected]> Date: Tue May 13 18:26:46 2025 +0100 io_uring/kbuf: account ring io_buffer_list memory Commit 475a8d30371604a6363da8e304a608a5959afc40 upstream. Follow the non-ringed pbuf struct io_buffer_list allocations and account it against the memcg. There is low chance of that being an actual problem as ring provided buffer should either pin user memory or allocate it, which is already accounted. Cc: [email protected] # 6.1 Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/3985218b50d341273cafff7234e1a7e6d0db9808.1747150490.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Vasiliy Kovalev <[email protected]> Date: Mon Mar 10 11:56:02 2025 +0300 jfs: validate AG parameters in dbMount() to prevent crashes [ Upstream commit 37bfb464ddca87f203071b5bd562cd91ddc0b40a ] Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch corrupted metadata early and avoid undefined behavior in dbAllocAG. Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE: - agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift (L2LPERCTL - 2*agheight) >= 0. - agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight)) ensures agperlev >= 1. - Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5). - LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG; 2^(10 - 2*agheight) prevents division to 0. - agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within stree (size 1365). - Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8). UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9 shift exponent -335544310 is negative CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400 dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613 jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105 jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Cc: [email protected] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=fe8264911355151c487f Signed-off-by: Vasiliy Kovalev <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Namjae Jeon <[email protected]> Date: Tue May 27 11:23:01 2025 +0900 ksmbd: allow a filename to contain special characters on SMB3.1.1 posix extension [ Upstream commit dc3e0f17f74558e8a2fce00608855f050de10230 ] If client send SMB2_CREATE_POSIX_CONTEXT to ksmbd, Allow a filename to contain special characters. Reported-by: Philipp Kerling <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Namjae Jeon <[email protected]> Date: Mon Sep 23 22:39:11 2024 +0900 ksmbd: remove unsafe_memcpy use in session setup commit d782d6e1d9078d6b82f8468dd6421050165e7d75 upstream. Kees pointed out to just use directly ->Buffer instead of pointing ->Buffer using offset not to use unsafe_memcpy(). Suggested-by: Kees Cook <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Namjae Jeon <[email protected]> Date: Thu Aug 15 08:56:35 2024 +0900 ksmbd: Use unsafe_memcpy() for ntlm_negotiate commit dfd046d0ced19b6ff5f11ec4ceab0a83de924771 upstream. rsp buffer is allocated larger than spnego_blob from smb2_allocate_rsp_buf(). Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sergio González Collado <[email protected]> Date: Sun Mar 2 23:15:18 2025 +0100 Kunit to check the longest symbol length commit c104c16073b7fdb3e4eae18f66f4009f6b073d6f upstream. The longest length of a symbol (KSYM_NAME_LEN) was increased to 512 in the reference [1]. This patch adds kunit test suite to check the longest symbol length. These tests verify that the longest symbol length defined is supported. This test can also help other efforts for longer symbol length, like [2]. The test suite defines one symbol with the longest possible length. The first test verify that functions with names of the created symbol, can be called or not. The second test, verify that the symbols are created (or not) in the kernel symbol table. [1] https://lore.kernel.org/lkml/[email protected]/ [2] https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Tested-by: Martin Rodriguez Reboredo <[email protected]> Reviewed-by: Shuah Khan <[email protected]> Reviewed-by: Rae Moar <[email protected]> Signed-off-by: Sergio González Collado <[email protected]> Link: https://github.com/Rust-for-Linux/linux/issues/504 Reviewed-by: Rae Moar <[email protected]> Acked-by: David Gow <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sven Schwermer <[email protected]> Date: Fri Apr 4 20:40:36 2025 +0200 leds: multicolor: Fix intensity setting while SW blinking [ Upstream commit e35ca991a777ef513040cbb36bc8245a031a2633 ] When writing to the multi_intensity file, don't unconditionally call led_set_brightness. By only doing this if blinking is inactive we prevent blinking from stopping if the blinking is in its off phase while the file is written. Instead, if blinking is active, the changed intensity values are applied upon the next blink. This is consistent with changing the brightness on monochrome LEDs with active blinking. Suggested-by: Jacek Anaszewski <[email protected]> Acked-by: Jacek Anaszewski <[email protected]> Acked-by: Pavel Machek <[email protected]> Reviewed-by: Tobias Deiminger <[email protected]> Tested-by: Sven Schuchmann <[email protected]> Signed-off-by: Sven Schwermer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yuan Chen <[email protected]> Date: Wed Jun 18 09:19:33 2025 +0800 libbpf: Fix null pointer dereference in btf_dump__free on allocation failure [ Upstream commit aa485e8789d56a4573f7c8d000a182b749eaa64d ] When btf_dump__new() fails to allocate memory for the internal hashmap (btf_dump->type_names), it returns an error code. However, the cleanup function btf_dump__free() does not check if btf_dump->type_names is NULL before attempting to free it. This leads to a null pointer dereference when btf_dump__free() is called on a btf_dump object. Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion") Signed-off-by: Yuan Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Sun Jul 6 10:58:04 2025 +0200 Linux 6.1.143 Link: https://lore.kernel.org/r/[email protected] Tested-by: Florian Fainelli <[email protected]> Tested-by: Hardik Garg <[email protected]> Tested-by: Salvatore Bonaccorso <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Mark Brown <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Miguel Ojeda <[email protected]> Tested-by: Peter Schneider <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Peng Fan <[email protected]> Date: Fri Apr 11 21:14:10 2025 +0800 mailbox: Not protect module_put with spin_lock_irqsave [ Upstream commit dddbd233e67e792bb0a3f9694a4707e6be29b2c6 ] &chan->lock is not supposed to protect 'chan->mbox'. And in __mbox_bind_client, try_module_get is also not protected by &chan->lock. So move module_put out of the lock protected region. Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Sat May 24 14:13:10 2025 +0800 md/md-bitmap: fix dm-raid max_write_behind setting [ Upstream commit 2afe17794cfed5f80295b1b9facd66e6f65e5002 ] It's supposed to be COUNTER_MAX / 2, not COUNTER_MAX. Link: https://lore.kernel.org/linux-raid/[email protected] Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Mon Jul 18 10:37:37 2022 +0800 media: imx-jpeg: Add a timeout mechanism for each frame [ Upstream commit cfed9632ca8e8bdf0128745ae2400b72c4292886 ] Add a timeout mechanism for each frame. If the frame can't be decoded or encoded, driver can cancel it to avoid hang. Fixes: 2db16c6ed72ce ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by: Ming Qian <[email protected]> Reviewed-by: Mirela Rabulea <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Stable-dep-of: 46e9c092f850 ("media: imx-jpeg: Move mxc_jpeg_free_slot_data() ahead") Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Mon Apr 21 16:12:54 2025 +0800 media: imx-jpeg: Cleanup after an allocation error [ Upstream commit 7500bb9cf164edbb2c8117d57620227b1a4a8369 ] When allocation failures are not cleaned up by the driver, further allocation errors will be false-positives, which will cause buffers to remain uninitialized and cause NULL pointer dereferences. Ensure proper cleanup of failed allocations to prevent these issues. Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Cc: [email protected] Signed-off-by: Ming Qian <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Mon Apr 21 16:12:52 2025 +0800 media: imx-jpeg: Move mxc_jpeg_free_slot_data() ahead [ Upstream commit 46e9c092f850bd7b4d06de92d3d21877f49a3fcb ] Move function mxc_jpeg_free_slot_data() above mxc_jpeg_alloc_slot_data() allowing to call that function during allocation failures. No functional changes are made. Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Cc: [email protected] Signed-off-by: Ming Qian <[email protected]> Reviewed-by: Nicolas Dufresne <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jason Wang <[email protected]> Date: Sat Jul 16 20:25:43 2022 +0800 media: imx-jpeg: Remove unnecessary memset() after dma_alloc_coherent() [ Upstream commit 2bcc3b48c8ddf2d83cf00a00c0d021970c271fff ] The `dma_alloc_coherent()' already zeroes out memory for us, so we don't need the redundant memset(). Signed-off-by: Jason Wang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Stable-dep-of: 46e9c092f850 ("media: imx-jpeg: Move mxc_jpeg_free_slot_data() ahead") Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Mon Apr 21 16:12:53 2025 +0800 media: imx-jpeg: Reset slot data pointers when freed [ Upstream commit faa8051b128f4b34277ea8a026d02d83826f8122 ] Ensure that the slot data pointers are reset to NULL and handles are set to 0 after freeing the coherent memory. This makes he function mxc_jpeg_alloc_slot_data() and mxc_jpeg_free_slot_data() safe to be called multiple times. Fixes: 2db16c6ed72c ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Cc: [email protected] Signed-off-by: Ming Qian <[email protected]> Reviewed-by: Nicolas Dufresne <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue May 30 09:16:30 2023 +0200 media: imx-jpeg: Support to assign slot for encoder/decoder [ Upstream commit 53ebeea50599c1ed05277d7a57e331a34e6d6a82 ] imx jpeg encoder and decoder support 4 slots each, aim to support some virtualization scenarios. driver should only enable one slot one time. but due to some hardware issue, only slot 0 can be enabled in imx8q platform, and they may be fixed in imx9 platform. Signed-off-by: Ming Qian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Stable-dep-of: 46e9c092f850 ("media: imx-jpeg: Move mxc_jpeg_free_slot_data() ahead") Signed-off-by: Sasha Levin <[email protected]>
Author: Ricardo Ribalda <[email protected]> Date: Mon Feb 24 10:34:55 2025 +0000 media: uvcvideo: Rollback non processed entities on error commit a70705d3c020d0d5c3ab6a5cc93e011ac35e7d48 upstream. If we fail to commit an entity, we need to restore the UVC_CTRL_DATA_BACKUP for the other uncommitted entities. Otherwise the control cache and the device would be out of sync. Cc: [email protected] Fixes: b4012002f3a3 ("[media] uvcvideo: Add support for control events") Reported-by: Hans de Goede <[email protected]> Closes: https://lore.kernel.org/linux-media/[email protected]/ Signed-off-by: Ricardo Ribalda <[email protected]> Message-ID: <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Ricardo Ribalda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Sun Apr 6 21:50:11 2025 +0200 mfd: max14577: Fix wakeup source leaks on device unbind [ Upstream commit d905d06e64b0eb3da43af6186c132f5282197998 ] Device can be unbound, so driver must also release memory for the wakeup source. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Simon Horman <[email protected]> Date: Tue Jun 24 17:35:12 2025 +0100 net: enetc: Correct endianness handling in _enetc_rd_reg64 [ Upstream commit 7b515f35a911fdc31fbde6531828dcd6ae9803d3 ] enetc_hw.h provides two versions of _enetc_rd_reg64. One which simply calls ioread64() when available. And another that composes the 64-bit result from ioread32() calls. In the second case the code appears to assume that each ioread32() call returns a little-endian value. However both the shift and logical or used to compose the return value would not work correctly on big endian systems if this were the case. Moreover, this is inconsistent with the first case where the return value of ioread64() is assumed to be in host byte order. It appears that the correct approach is for both versions to treat the return value of ioread*() functions as being in host byte order. And this patch corrects the ioread32()-based version to do so. This is a bug but would only manifest on big endian systems that make use of the ioread32-based implementation of _enetc_rd_reg64. While all in-tree users of this driver are little endian and make use of the ioread64-based implementation of _enetc_rd_reg64. Thus, no in-tree user of this driver is affected by this bug. Flagged by Sparse. Compile tested only. Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Closes: https://lore.kernel.org/all/AM9PR04MB850500D3FC24FE23DEFCEA158879A@AM9PR04MB8505.eurprd04.prod.outlook.com/ Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Wei Fang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jakub Kicinski <[email protected]> Date: Tue Jun 24 11:32:58 2025 -0700 net: selftests: fix TCP packet checksum [ Upstream commit 8d89661a36dd3bb8c9902cff36dc0c144dce3faf ] The length in the pseudo header should be the length of the L3 payload AKA the L4 header+payload. The selftest code builds the packet from the lower layers up, so all the headers are pushed already when it constructs L4. We need to subtract the lower layer headers from skb->len. Fixes: 3e1e58d64c3d ("net: add generic selftest support") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Gerhard Engleder <[email protected]> Reported-by: Oleksij Rempel <[email protected]> Tested-by: Oleksij Rempel <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Olga Kornievskaia <[email protected]> Date: Fri Apr 25 14:09:21 2025 -0400 NFSv4.2: fix listxattr to return selinux security label [ Upstream commit 243fea134633ba3d64aceb4c16129c59541ea2c6 ] Currently, when NFS is queried for all the labels present on the file via a command example "getfattr -d -m . /mnt/testfile", it does not return the security label. Yet when asked specifically for the label (getfattr -n security.selinux) it will be returned. Include the security label when all attributes are queried. Signed-off-by: Olga Kornievskaia <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Han Young <[email protected]> Date: Sun May 4 20:57:04 2025 +0800 NFSv4: Always set NLINK even if the server doesn't support it [ Upstream commit 3a3065352f73381d3a1aa0ccab44aec3a5a9b365 ] fattr4_numlinks is a recommended attribute, so the client should emulate it even if the server doesn't support it. In decode_attr_nlink function in nfs4xdr.c, nlink is initialized to 1. However, this default value isn't set to the inode due to the check in nfs_fhget. So if the server doesn't support numlinks, inode's nlink will be zero, the mount will fail with error "Stale file handle". Set the nlink to 1 if the server doesn't support it. Signed-off-by: Han Young <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Scott Mayhew <[email protected]> Date: Wed Apr 16 11:23:38 2025 -0400 NFSv4: xattr handlers should check for absent nfs filehandles [ Upstream commit 6e9a2f8dbe93c8004c2af2c0158888628b7ca034 ] The nfs inodes for referral anchors that have not yet been followed have their filehandles zeroed out. Attempting to call getxattr() on one of these will cause the nfs client to send a GETATTR to the nfs server with the preceding PUTFH sans filehandle. The server will reply NFS4ERR_NOFILEHANDLE, leading to -EIO being returned to the application. For example: $ strace -e trace=getxattr getfattr -n system.nfs4_acl /mnt/t/ref getxattr("/mnt/t/ref", "system.nfs4_acl", NULL, 0) = -1 EIO (Input/output error) /mnt/t/ref: system.nfs4_acl: Input/output error +++ exited with 1 +++ Have the xattr handlers return -ENODATA instead. Signed-off-by: Scott Mayhew <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jens Axboe <[email protected]> Date: Fri Jun 13 13:37:41 2025 -0600 nvme: always punt polled uring_cmd end_io work to task_work Commit 9ce6c9875f3e995be5fd720b65835291f8a609b1 upstream. Currently NVMe uring_cmd completions will complete locally, if they are polled. This is done because those completions are always invoked from task context. And while that is true, there's no guarantee that it's invoked under the right ring context, or even task. If someone does NVMe passthrough via multiple threads and with a limited number of poll queues, then ringA may find completions from ringB. For that case, completing the request may not be sound. Always just punt the passthrough completions via task_work, which will redirect the completion, if needed. Cc: [email protected] Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands") Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kees Cook <[email protected]> Date: Mon Apr 21 16:15:19 2025 -0700 ovl: Check for NULL d_inode() in ovl_dentry_upper() [ Upstream commit 8a39f1c870e9d6fbac5638f3a42a6a6363829c49 ] In ovl_path_type() and ovl_is_metacopy_dentry() GCC notices that it is possible for OVL_E() to return NULL (which implies that d_inode(dentry) may be NULL). This would result in out of bounds reads via container_of(), seen with GCC 15's -Warray-bounds -fdiagnostics-details. For example: In file included from arch/x86/include/generated/asm/rwonce.h:1, from include/linux/compiler.h:339, from include/linux/export.h:5, from include/linux/linkage.h:7, from include/linux/fs.h:5, from fs/overlayfs/util.c:7: In function 'ovl_upperdentry_dereference', inlined from 'ovl_dentry_upper' at ../fs/overlayfs/util.c:305:9, inlined from 'ovl_path_type' at ../fs/overlayfs/util.c:216:6: include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'struct inode[7486503276667837]' [-Werror=array-bounds=] 44 | #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x)) | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/asm-generic/rwonce.h:50:9: note: in expansion of macro '__READ_ONCE' 50 | __READ_ONCE(x); \ | ^~~~~~~~~~~ fs/overlayfs/ovl_entry.h:195:16: note: in expansion of macro 'READ_ONCE' 195 | return READ_ONCE(oi->__upperdentry); | ^~~~~~~~~ 'ovl_path_type': event 1 185 | return inode ? OVL_I(inode)->oe : NULL; 'ovl_path_type': event 2 Avoid this by allowing ovl_dentry_upper() to return NULL if d_inode() is NULL, as that means the problematic dereferencing can never be reached. Note that this fixes the over-eager compiler warning in an effort to being able to enable -Warray-bounds globally. There is no known behavioral bug here. Suggested-by: Amir Goldstein <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hector Martin <[email protected]> Date: Tue Apr 1 10:17:08 2025 +0100 PCI: apple: Fix missing OF node reference in apple_pcie_setup_port [ Upstream commit 7fa9fbf39116b061f8a41cd84f1884c545f322c4 ] In the success path, we hang onto a reference to the node, so make sure to grab one. The caller iterator puts our borrowed reference when we return. Signed-off-by: Hector Martin <[email protected]> Signed-off-by: Alyssa Rosenzweig <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Tested-by: Janne Grunau <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Acked-by: Alyssa Rosenzweig <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Janne Grunau <[email protected]> Date: Tue Apr 1 10:17:01 2025 +0100 PCI: apple: Set only available ports up [ Upstream commit 751bec089c4eed486578994abd2c5395f08d0302 ] Iterating over disabled ports results in of_irq_parse_raw() parsing the wrong "interrupt-map" entries, as it takes the status of the node into account. This became apparent after disabling unused PCIe ports in the Apple Silicon device trees instead of deleting them. Switching from for_each_child_of_node_scoped() to for_each_available_child_of_node_scoped() solves this issue. Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up") Fixes: a0189fdfb73d ("arm64: dts: apple: t8103: Disable unused PCIe ports") Signed-off-by: Janne Grunau <[email protected]> Signed-off-by: Alyssa Rosenzweig <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Tested-by: Janne Grunau <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Acked-by: Alyssa Rosenzweig <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/asahi/20230214-apple_dts_pcie_disable_unused-v1-0-5ea0d3ddcde3@jannau.net/ Link: https://lore.kernel.org/asahi/[email protected]/ Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Zhang Zekun <[email protected]> Date: Sat Aug 31 12:04:12 2024 +0800 PCI: apple: Use helper function for_each_child_of_node_scoped() [ Upstream commit f60b4e06a945f25d463ae065c6e41c6e24faee0a ] The for_each_available_child_of_node_scoped() helper provides a scope-based clean-up functionality to put the device_node automatically, and as such, there is no need to call of_node_put() directly. Thus, use this helper to simplify the code. Signed-off-by: Zhang Zekun <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <[email protected]> Stable-dep-of: 751bec089c4e ("PCI: apple: Set only available ports up") Signed-off-by: Sasha Levin <[email protected]>
Author: Joonas Lahtinen <[email protected]> Date: Thu May 22 09:41:27 2025 +0300 Revert "drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1" [ Upstream commit ed5915cfce2abb9a553c3737badebd4a11d6c9c7 ] This reverts commit d6e020819612a4a06207af858e0978be4d3e3140. The IS_DGFX check was put in place because error capture of buffer objects is expected to be broken on devices with VRAM. Userspace fix[1] to the impacted media driver has been submitted, merged and a new driver release is out as 25.2.3 where the capture flag is dropped on DG1 thus unblocking the usage of media driver on DG1. [1] https://github.com/intel/media-driver/commit/93c07d9b4b96a78bab21f6acd4eb863f4313ea4a Cc: [email protected] # v6.0+ Cc: Ville Syrjälä <[email protected]> Cc: Andi Shyti <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Thomas Hellström <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Acked-by: Tvrtko Ursulin <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] [Joonas: Update message to point out the merged userspace fix] Signed-off-by: Joonas Lahtinen <[email protected]> (cherry picked from commit d2dc30e0aa252830f908c8e793d3139d51321370) Signed-off-by: Joonas Lahtinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Brett A C Sheffield (Librecast) <[email protected]> Date: Wed Jul 2 13:41:51 2025 +0200 Revert "ipv6: save dontfrag in cork" This reverts commit 4f809be95d9f3db13d31c574b8764c8d429f0c3b which is commit a18dfa9925b9ef6107ea3aa5814ca3c704d34a8a upstream. A regression was introduced when backporting this to the stable kernels without applying previous commits in this series. When sending IPv6 UDP packets larger than MTU, EMSGSIZE was returned instead of fragmenting the packets as expected. As there is no compelling reason for this commit to be present in the stable kernels it should be reverted. Signed-off-by: Brett A C Sheffield <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: FUJITA Tomonori <[email protected]> Date: Sat Mar 8 13:45:06 2025 +0900 rust: module: place cleanup_module() in .exit.text section [ Upstream commit 249c3a0e53acefc2b06d3b3e1fc28fb2081f878d ] Place cleanup_module() in .exit.text section. Currently, cleanup_module() is likely placed in the .text section. It's inconsistent with the layout of C modules, where cleanup_module() is placed in .exit.text. [ Boqun asked for an example of how the section changed to be put in the log. Tomonori provided the following examples: C module: $ objdump -t ~/build/x86/drivers/block/loop.o|grep clean 0000000000000000 l O .exit.data 0000000000000008 __UNIQUE_ID___addressable_cleanup_module412 0000000000000000 g F .exit.text 000000000000009c cleanup_module Rust module without this patch: $ objdump -t ~/build/x86/samples/rust/rust_minimal.o|grep clean 00000000000002b0 g F .text 00000000000000c6 cleanup_module 0000000000000000 g O .exit.data 0000000000000008 _R...___UNIQUE_ID___addressable_cleanup_module Rust module with this patch: $ objdump -t ~/build/x86/samples/rust/rust_minimal.o|grep clean 0000000000000000 g F .exit.text 00000000000000c6 cleanup_module 0000000000000000 g O .exit.data 0000000000000008 _R...___UNIQUE_ID___addressable_cleanup_module - Miguel ] Signed-off-by: FUJITA Tomonori <[email protected]> Acked-by: Jarkko Sakkinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Heiko Carstens <[email protected]> Date: Thu Apr 24 17:07:01 2025 +0200 s390/entry: Fix last breaking event handling in case of stack corruption commit ae952eea6f4a7e2193f8721a5366049946e012e7 upstream. In case of stack corruption stack_invalid() is called and the expectation is that register r10 contains the last breaking event address. This dependency is quite subtle and broke a couple of years ago without that anybody noticed. Fix this by getting rid of the dependency and read the last breaking event address from lowcore. Fixes: 56e62a737028 ("s390: convert to generic entry") Acked-by: Ilya Leoshkevich <[email protected]> Reviewed-by: Alexander Gordeev <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Fedor Pchelkin <[email protected]> Date: Wed Jun 11 22:20:10 2025 +0300 s390/pkey: Prevent overflow in size calculation for memdup_user() commit 7360ee47599af91a1d5f4e74d635d9408a54e489 upstream. Number of apqn target list entries contained in 'nr_apqns' variable is determined by userspace via an ioctl call so the result of the product in calculation of size passed to memdup_user() may overflow. In this case the actual size of the allocated area and the value describing it won't be in sync leading to various types of unpredictable behaviour later. Use a proper memdup_array_user() helper which returns an error if an overflow is detected. Note that it is different from when nr_apqns is initially zero - that case is considered valid and should be handled in subsequent pkey_handler implementations. Found by Linux Verification Center (linuxtesting.org). Fixes: f2bbc96e7cfa ("s390/pkey: add CCA AES cipher key support") Cc: [email protected] Signed-off-by: Fedor Pchelkin <[email protected]> Reviewed-by: Holger Dengler <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chen Yu <[email protected]> Date: Wed Jun 4 12:25:56 2025 +0800 scsi: megaraid_sas: Fix invalid node index commit 752eb816b55adb0673727ba0ed96609a17895654 upstream. On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly. Signed-off-by: Chen Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: 8049da6f3943 ("scsi: megaraid_sas: Use irq_set_affinity_and_hint()") Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Fabio Estevam <[email protected]> Date: Thu Jun 19 08:46:17 2025 -0300 serial: imx: Restore original RXTL for console to fix data loss commit f23c52aafb1675ab1d1f46914556d8e29cbbf7b3 upstream. Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency") introduced a regression on the i.MX6UL EVK board. The issue can be reproduced with the following steps: - Open vi on the board. - Paste a text file (~150 characters). - Save the file, then repeat the process. - Compare the sha256sum of the saved files. The checksums do not match due to missing characters or entire lines. Fix this by restoring the RXTL value to 1 when the UART is used as a console. This ensures timely RX interrupts and reliable data reception in console mode. With this change, pasted content is saved correctly, and checksums are always consistent. Cc: stable <[email protected]> Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Nathan Chancellor <[email protected]> Date: Mon Jun 9 14:13:14 2025 -0700 staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher() commit a55bc4ffc06d8c965a7d6f0a01ed0ed41380df28 upstream. After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which causes CONFIG_KASAN to be enabled in allmodconfig again, arm64 allmodconfig builds with older versions of clang (15 through 17) show an instance of -Wframe-larger-than (which breaks the build with CONFIG_WERROR=y): drivers/staging/rtl8723bs/core/rtw_security.c:1287:5: error: stack frame size (2208) exceeds limit (2048) in 'rtw_aes_decrypt' [-Werror,-Wframe-larger-than] 1287 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) | ^ This comes from aes_decipher() being inlined in rtw_aes_decrypt(). Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher() also uses a decent amount of stack, just under the limit of 2048: drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than] 864 | static signed int aes_cipher(u8 *key, uint hdrlen, | ^ -Rpass-analysis=stack-frame-layout only shows one large structure on the stack, which is the ctx variable inlined from aes128k128d(). A good number of the other variables come from the additional checks of fortified string routines, which are present in memset(), which both aes_cipher() and aes_decipher() use to initialize some temporary buffers. In this case, since the size is known at compile time, these additional checks should not result in any code generation changes but allmodconfig has several sanitizers enabled, which may make it harder for the compiler to eliminate the compile time checks and the variables that come about from them. The memset() calls are just initializing these buffers to zero, so use '= {}' instead, which is used all over the kernel and does the exact same thing as memset() without the fortify checks, which drops the stack usage of these functions by a few hundred kilobytes. drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1584) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than] 864 | static signed int aes_cipher(u8 *key, uint hdrlen, | ^ drivers/staging/rtl8723bs/core/rtw_security.c:1271:5: warning: stack frame size (1456) exceeds limit (128) in 'rtw_aes_decrypt' [-Wframe-larger-than] 1271 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) | ^ Cc: [email protected] Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20250609-rtl8723bs-fix-clang-arm64-wflt-v1-1-e2accba43def@kernel.org Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jakub Lewalski <[email protected]> Date: Mon Mar 31 18:06:19 2025 +0200 tty: serial: uartlite: register uart driver in init [ Upstream commit 6bd697b5fc39fd24e2aa418c7b7d14469f550a93 ] When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called. Signed-off-by: Jakub Lewalski <[email protected]> Signed-off-by: Elodie Decerle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Slaby (SUSE) <[email protected]> Date: Mon Jan 22 12:03:44 2024 +0100 tty: vt: make consw::con_switch() return a bool [ Upstream commit 8d5cc8eed738e3202379722295c626cba0849785 ] The non-zero (true) return value from consw::con_switch() means a redraw is needed. So make this return type a bool explicitly instead of int. The latter might imply that -Eerrors are expected. They are not. And document the hook. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Tested-by: Helge Deller <[email protected]> # parisc STI console Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover") Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Slaby (SUSE) <[email protected]> Date: Mon Jan 22 12:03:34 2024 +0100 tty: vt: make init parameter of consw::con_init() a bool [ Upstream commit dae3e6b6180f1a2394b984c596d39ed2c57d25fe ] The 'init' parameter of consw::con_init() is true for the first call of the hook on a particular console. So make the parameter a bool. And document the hook. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Cc: Helge Deller <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Tested-by: Helge Deller <[email protected]> # parisc STI console Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover") Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Slaby (SUSE) <[email protected]> Date: Mon Jan 22 12:03:35 2024 +0100 tty: vt: sanitize arguments of consw::con_clear() [ Upstream commit 559f01a0ee6d924c6fec3eaf6a5b078b15e71070 ] In consw::con_clear(): * Height is always 1, so drop it. * Offsets and width are always unsigned values, so re-type them as such. This needs a new __fbcon_clear() in the fbcon code to still handle height which might not be 1 when called internally. Note that tests for negative count/width are left in place -- they are taken care of in the next patches. And document the hook. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Helge Deller <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Tested-by: Helge Deller <[email protected]> # parisc STI console Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover") Signed-off-by: Sasha Levin <[email protected]>
Author: Long Li <[email protected]> Date: Mon May 5 17:56:35 2025 -0700 uio_hv_generic: Align ring size to system page [ Upstream commit 0315fef2aff9f251ddef8a4b53db9187429c3553 ] Following the ring header, the ring data should align to system page boundary. Adjust the size if necessary. Cc: [email protected] Fixes: 95096f2fbd10 ("uio-hv-generic: new userspace i/o driver for VMBus") Signed-off-by: Long Li <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Message-ID: <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Saurabh Sengar <[email protected]> Date: Sat Mar 30 01:51:58 2024 -0700 uio_hv_generic: Query the ringbuffer size for device [ Upstream commit e566ed5b64177a0c07b677568f623ed31d23406d ] Query the ring buffer size from pre defined table per device and use that value for allocating the ring buffer for that device. Keep the size as current default which is 2 MB if the device doesn't have any preferred ring size. Signed-off-by: Saurabh Sengar <[email protected]> Reviewed-by: Long Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 0315fef2aff9 ("uio_hv_generic: Align ring size to system page") Signed-off-by: Sasha Levin <[email protected]>
Author: Sami Tolvanen <[email protected]> Date: Wed Mar 26 19:05:00 2025 +0000 um: Add cmpxchg8b_emu and checksum functions to asm-prototypes.h [ Upstream commit 674d03f6bd6b0f8327f1a4920ff5893557facfbd ] With CONFIG_GENDWARFKSYMS, um builds fail due to missing prototypes in asm/asm-prototypes.h. Add declarations for cmpxchg8b_emu and the exported checksum functions, including csum_partial_copy_generic as it's also exported. Cc: Masahiro Yamada <[email protected]> Cc: [email protected] Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Sami Tolvanen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tiwei Bie <[email protected]> Date: Fri Jun 6 20:44:25 2025 +0800 um: ubd: Add missing error check in start_io_thread() [ Upstream commit c55c7a85e02a7bfee20a3ffebdff7cbeb41613ef ] The subsequent call to os_set_fd_block() overwrites the previous return value. OR the two return values together to fix it. Fixes: f88f0bdfc32f ("um: UBD Improvements") Signed-off-by: Tiwei Bie <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Benjamin Berg <[email protected]> Date: Tue Apr 8 09:45:24 2025 +0200 um: use proper care when taking mmap lock during segfault [ Upstream commit 6767e8784cd2e8b386a62330ea6864949d983a3e ] Segfaults can occur at times where the mmap lock cannot be taken. If that happens the segfault handler may not be able to take the mmap lock. Fix the code to use the same approach as most other architectures. Unfortunately, this requires copying code from mm/memory.c and modifying it slightly as UML does not have exception tables. Signed-off-by: Benjamin Berg <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andy Shevchenko <[email protected]> Date: Fri Mar 21 18:49:49 2025 +0200 usb: Add checks for snprintf() calls in usb_alloc_dev() [ Upstream commit 82fe5107fa3d21d6c3fba091c9dbc50495588630 ] When creating a device path in the driver the snprintf() takes up to 16 characters long argument along with the additional up to 12 characters for the signed integer (as it can't see the actual limits) and tries to pack this into 16 bytes array. GCC complains about that when build with `make W=1`: drivers/usb/core/usb.c:705:25: note: ‘snprintf’ output between 3 and 28 bytes into a destination of size 16 Since everything works until now, let's just check for the potential buffer overflow and bail out. It is most likely a never happen situation, but at least it makes GCC happy. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Robert Hodaszi <[email protected]> Date: Thu Apr 3 16:40:04 2025 +0200 usb: cdc-wdm: avoid setting WDM_READ for ZLP-s [ Upstream commit 387602d8a75574fafb451b7a8215e78dfd67ee63 ] Don't set WDM_READ flag in wdm_in_callback() for ZLP-s, otherwise when userspace tries to poll for available data, it might - incorrectly - believe there is something available, and when it tries to non-blocking read it, it might get stuck in the read loop. For example this is what glib does for non-blocking read (briefly): 1. poll() 2. if poll returns with non-zero, starts a read data loop: a. loop on poll() (EINTR disabled) b. if revents was set, reads data I. if read returns with EINTR or EAGAIN, goto 2.a. II. otherwise return with data So if ZLP sets WDM_READ (#1), we expect data, and try to read it (#2). But as that was a ZLP, and we are doing non-blocking read, wdm_read() returns with EAGAIN (#2.b.I), so loop again, and try to read again (#2.a.). With glib, we might stuck in this loop forever, as EINTR is disabled (#2.a). Signed-off-by: Robert Hodaszi <[email protected]> Acked-by: Oliver Neukum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chance Yang <[email protected]> Date: Fri Apr 11 16:33:26 2025 +0800 usb: common: usb-conn-gpio: use a unique name for usb connector device [ Upstream commit d4e5b10c55627e2f3fc9e5b337a28b4e2f02a55e ] The current implementation of the usb-conn-gpio driver uses a fixed "usb-charger" name for all USB connector devices. This causes conflicts in the power supply subsystem when multiple USB connectors are present, as duplicate names are not allowed. Use IDA to manage unique IDs for naming usb connectors (e.g., usb-charger-0, usb-charger-1). Signed-off-by: Chance Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Michael Grzeschik <[email protected]> Date: Thu Apr 17 19:40:17 2025 +0200 usb: dwc2: also exit clock_gating when stopping udc while suspended [ Upstream commit af076a41f8a28faf9ceb9dd2d88aef2c202ef39a ] It is possible that the gadget will be disabled, while the udc is suspended. When enabling the udc in that case, the clock gating will not be enabled again. Leaving the phy unclocked. Even when the udc is not enabled, connecting this powered but not clocked phy leads to enumeration errors on the host side. To ensure that the clock gating will be in an valid state, we ensure that the clock gating will be enabled before stopping the udc. Signed-off-by: Michael Grzeschik <[email protected]> Acked-by: Minas Harutyunyan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chen Yufeng <[email protected]> Date: Tue Apr 15 14:58:57 2025 +0800 usb: potential integer overflow in usbg_make_tpg() [ Upstream commit 153874010354d050f62f8ae25cbb960c17633dc5 ] The variable tpgt in usbg_make_tpg() is defined as unsigned long and is assigned to tpgt->tport_tpgt, which is defined as u16. This may cause an integer overflow when tpgt is greater than USHRT_MAX (65535). I haven't tried to trigger it myself, but it is possible to trigger it by calling usbg_make_tpg() with a large value for tpgt. I modified the type of tpgt to match tpgt->tport_tpgt and adjusted the relevant code accordingly. This patch is similar to commit 59c816c1f24d ("vhost/scsi: potential memory corruption"). Signed-off-by: Chen Yufeng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jos Wang <[email protected]> Date: Sun Feb 9 15:19:26 2025 +0800 usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode [ Upstream commit b4b38ffb38c91afd4dc387608db26f6fc34ed40b ] Although some Type-C DRD devices that do not support the DP Sink function (such as Huawei Mate 40Pro), the Source Port initiates Enter Mode CMD, but the device responds to Enter Mode ACK, the Source port then initiates DP Status Update CMD, and the device responds to DP Status Update NAK. As PD2.0 spec ("6.4.4.3.4 Enter Mode Command")，A DR_Swap Message Shall Not be sent during Modal Operation between the Port Partners. At this time, the source port initiates DR_Swap message through the "echo device > /sys/class/typec/port0/data_role" command to switch the data role from host to device. The device will initiate a Hard Reset for recovery, resulting in the failure of data role swap. Therefore, when DP Status Update NAK is received, Exit Mode CMD is initiated to exit the currently entered DP altmode. Signed-off-by: Jos Wang <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Michael Grzeschik <[email protected]> Date: Fri Apr 4 00:21:01 2025 +0200 usb: typec: mux: do not return on EOPNOTSUPP in {mux, switch}_set [ Upstream commit 0f7bbef1794dc87141897f804e5871a293aa174b ] Since the typec connectors can have many muxes or switches for different lanes (sbu, usb2, usb3) going into different modal states (usb2, usb3, audio, debug) all of them will be called on typec_switch_set and typec_mux_set. But not all of them will be handling the expected mode. If one of the mux or switch will come back with EOPTNOSUPP this is no reason to stop running through the next ones. Therefor we skip this particular error value and continue calling the next. Signed-off-by: Michael Grzeschik <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Slaby (SUSE) <[email protected]> Date: Wed Jul 12 10:59:37 2023 +0200 vgacon: remove unneeded forward declarations [ Upstream commit 6ceed69cde8fe4a78fe50d62d7a88a5c1eed4709 ] Most of the forward declarations in vgacon are not needed. Drop them. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Helge Deller <[email protected]> Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover") Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Slaby (SUSE) <[email protected]> Date: Wed Jul 12 10:59:36 2023 +0200 vgacon: switch vgacon_scrolldelta() and vgacon_restore_screen() [ Upstream commit 03b89a08484a88fb9e0604cab2b3eb0c2f265c74 ] Switch vgacon_scrolldelta() and vgacon_restore_screen() positions, so that the former is not needed to be forward-declared. Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Helge Deller <[email protected]> Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover") Signed-off-by: Sasha Levin <[email protected]>
Author: Stefano Garzarella <[email protected]> Date: Mon Jun 23 12:00:53 2025 +0200 vsock/uapi: fix linux/vm_sockets.h userspace compilation errors [ Upstream commit 22bbc1dcd0d6785fb390c41f0dd5b5e218d23bdd ] If a userspace application just include <linux/vm_sockets.h> will fail to build with the following errors: /usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’ 182 | unsigned char svm_zero[sizeof(struct sockaddr) - | ^~~~~~ /usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function) 183 | sizeof(sa_family_t) - | Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__) where `struct sockaddr` and `sa_family_t` are defined. We already do something similar in <linux/mptcp.h> and <linux/if.h>. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Daan De Meyer <[email protected]> Signed-off-by: Stefano Garzarella <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lachlan Hodges <[email protected]> Date: Sat Jun 21 22:32:09 2025 +1000 wifi: mac80211: fix beacon interval calculation overflow [ Upstream commit 7a3750ff0f2e8fee338a9c168f429f6c37f0e820 ] As we are converting from TU to usecs, a beacon interval of 100*1024 usecs will lead to integer wrapping. To fix change to use a u32. Fixes: 057d5f4ba1e4 ("mac80211: sync dtim_count to TSF") Signed-off-by: Lachlan Hodges <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nathan Chancellor <[email protected]> Date: Tue Mar 18 15:32:30 2025 -0700 x86/tools: Drop duplicate unlikely() definition in insn_decoder_test.c commit f710202b2a45addea3dcdcd862770ecbaf6597ef upstream. After commit c104c16073b7 ("Kunit to check the longest symbol length"), there is a warning when building with clang because there is now a definition of unlikely from compiler.h in tools/include/linux, which conflicts with the one in the instruction decoder selftest: arch/x86/tools/insn_decoder_test.c:15:9: warning: 'unlikely' macro redefined [-Wmacro-redefined] Remove the second unlikely() definition, as it is no longer necessary, clearing up the warning. Fixes: c104c16073b7 ("Kunit to check the longest symbol length") Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/20250318-x86-decoder-test-fix-unlikely-redef-v1-1-74c84a7bf05b@kernel.org Signed-off-by: Greg Kroah-Hartman <[email protected]>